Well I never thought that I would consider selling this stuff but that time has come. Im currently in going to school FT for electrical engineering and money has become tight. Not to mention my needs for a more comfortable and larger vehicle have arose.

First off a pair of Sparco Pro 2000's with sliders and Sparco mounting brackets for Integras and Civics. the seats are black in color and were only used for one summer season. They are in great coondition. The only flaw that I can recall is a small, maybe the size of a quarter, blotch of expanding foam on one seat. I worked a little to remove it but gave up, I do plan on working more on it before they are sold. They come with all padding and complete hardware. These seats retail for over $1200 a pair w/o brackets, I will be offering them for $850


SORRY FOR THE SPOTS ON THE PICTURE, I DIDN'T CATCH IT UNTILL AFTER THE PIC WAS TAKEN. I WILL GET A NEW ONE THIS WEEKEND

HERE IS THE SPOT ON THE DRIVER SEAT

THIS IS THE RIGHT HARNESS HOLE ON THE PASSENGER SEAT, THE BOTTOM LEFT CORNER BROKE OFF





Second up is my B18c1 project that I was building for my current Civic. I've really ran out of time to even consider finishing the assembly. The block was removed from a freinds GS-R with about 115k on the clock. I had the block hot tanked and honed out to accomidate the new pistons.

<U>Block Parts List</U>

JDM ITR oversized pistons (.25 was written on box)
Pistons are already attached to oem GS-R rods
An uninstalled set of ARP rod bolts
ARP head studs (I'm missing some of the washers and nuts for these)
Oem crank
Oem oil pan
All girtles
All squirters
All hardware to reassemble will be included

<U>Cylinder Head Details </U>

Hot tanked
3 angle exhaust and 4 angle intake valve job
Brand new SuperTech Valves
Brand new Rocket Motorsports Gen 2 valve springs (Huge Seat Pressure)
Brand new Rocket Motorsports Gen 1 Ti retainers
Brand new OEM Honda Guide seals
Set of brand new ST Corsa Cam gears

The head has been fully assembled and will include all rockers and a pair of OEM GS-R cams.

The engine will also include the OEM valve cover, a 1 year old distributor, a set of MSD ignition wires, and all the gaskets and seals needed for assembly.

<U>What Is Needed Finish Engine</U>

Timing Belt
All bearings
Piston Rings
New Oil pump
Washers and Nuts of ARP headbolts

<U>Transmission</U>

Unit off a B18c1 with 150k on clock
No grinds
Shifts great
All shift linkage is included
A ACT Prolite Flywheel (10k miles)
An ACT Street Clutch (10k miles)
OEM axles

Uberdata Chipped P72

ASKING $2800

Well I think that is all I can think of right now. If I missed anything of you have any questions please post em up. I don't have picture of anything yet, but I will try to go home and get some this weekend. All of this is best offer and I will entertain just about anything, just pm me what you are thinking. This engine setup should yeild about 11.5-7 compression and should be capable of 10k+ rpm.

Please Bump if you look, Thanks


Modified by cnydc2 at 4:28 PM 11/14/2007

 

Bump for nice weather

 

Bump before HW

 

I'll have pics up this weekend

 

May be willing to part out swap

 

Got some pics...will post em up in a day or two

 

Pics are finally up. The seats are alil dusty, I'll try to get around to vacuuming them and get some new pics

 

Bump

 

Bumpidy

 

Offers Offers Offers

 

bump

 

bump for a good seller

 

Thanks Bro

 

Where are you located?

 

Im located at zip code 13148, it's a town between syracuse and rochester off of Route 90

But I'm willing to do a little driving to meet people