Does anyone know where i can get an exhaust system that runs straight back and out the passenger side instead of dealing with all the curves and having it come out of the drivers side?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mxjosh17 &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone know where i can get an exhaust system that runs straight back and out the passenger side instead of dealing with all the curves and having it come out of the drivers side?</TD></TR></TABLE>


I got a guy in IL that can do this for ya. Bit of a drive for ya tho. He did stright pipe no cat on my crx.

 

wow your exhaust!
total fail looks like garbage.and he said straight out of passenger side not straight pipe with a ricey muffler still with all the curves

 

Well I don't think you really could throw the curves out.. Because of the floor and the gas tank.. ? The pipe would have to run lower and well.. it would be too low... Anyway a "straight" pipe is pretty easy just go to any muffler shop, they have em!

 

I would just go straight, bend before gas tank, go over Rear LCA and straight out. but i think it will look like **** becuase of the empty gap on the driver side.

Most muffler shops dont weld exhaust and use clamps, and dont carry SS.

 

what about if i wanna try same thing but on the passenger side and make a custom lip so the muffler will fit?! will it be ok?! if i used EG muffler?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IP RACING &raquo;</TD></TR><TR><TD CLASS="quote">wow your exhaust!
total fail looks like garbage.and he said straight out of passenger side not straight pipe with a ricey muffler still with all the curves</TD></TR></TABLE>

THANKS SIR

 

Dont they sell crx exhaust that just go str8 out i coulda sworn theres no name brands and other junk on eBay try that

 

my brother went to Lunas muffler shop (any muffler shop can do it) charged him 80 for piping and welding, bro brought in the n1 and the greddy resonator. **** is hella quite!

his wagon under the gas tank

 

how about a Buddy Club spec II exhaust?

[IMG][/IMG]

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dxtosirex &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>


seriously, im not tryin to bash u or make you feel like an idiot. but im entitled to my opinion, and its cars with exhaust like that, that make people hate these cars. that exhaust sucks *****. cheapo 30 dollar muffler. and a hack *** piping job. like where u tryin to make your exhaust angle up like a supra? well it doesnt look cool. and its WAY over exaggerated. **** why didnt you just put side pipes on it?

 

i was lookin at the skunk2 exhaust and that doesnt look like it would come out of the drivers side...but it could just be a universal skunk2 picture...does any1 have a skunk 2 exhaust system?..if so do u like it?

 

If you're truly looking for all out ***** to the wall performance just get a buddy club spec II. Running one myself and it's really not that loud. I can still hear my music with the silencer out, and with it in sounds just like my old 5zigen fireball exhaust .

 

will the buddy club fit on my 1990 dx hatch...or only the si's...im sure its a dumb question but i dont feel like buyin the wrong exhaust

and do they come with removable silencers?

thnx

 

o ya and do u happen to no what the diameter of the exhaust is because the site i was just lookin at them under didnt say...and do you happen to have any pics of it on your car..like what it looks like on the back

Thnx for your help

 

they make an ef9 model

 

im about to make this same exhaust out of a megan racing drift spec from my EK hatch. dosnt look too low and its pretty strait... I think it looks super nice...

 

Diameter is something like 60mm? Can't say for sure though, but I do know that the EF8/EF9 Spec II systems have a smaller tube ID than EG's/EK's/etc.

 

You don't need to do a 'straight exhaust' to make power. Just buy mandrel bends and have a muffler shop weld them in. Check out this homemade exhaust:



2.5" mandrel bent exhaust, painted flat black. Super cheap to do, and flows VERY well.

 

get the invidia n1 sound real nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prettylew &raquo;</TD></TR><TR><TD CLASS="quote">


seriously, im not tryin to bash u or make you feel like an idiot. but im entitled to my opinion, and its cars with exhaust like that, that make people hate these cars. that exhaust sucks *****. cheapo 30 dollar muffler. and a hack *** piping job. like where u tryin to make your exhaust angle up like a supra? well it doesnt look cool. and its WAY over exaggerated. **** why didnt you just put side pipes on it?</TD></TR></TABLE>

THANKS AGAIN As I said its my old crx. Its was&lt; put that kinda of exhaust on or run open header. Dont get me wrong id rather run open header. I just dont think johnny law would like that. $30 for the muff. More like I got it for free lmfao.

OLD PIC here ya go bash away at my old whip





Owner since than has fixed, painted and sold the car!

 

hey im really lookin at the buddy club exhaust...but i was wondering how does it sound?...how loud is it?...and it looks like it kinda sticks out far from the bumper from the pic of 1989CivicSi's red si pic...does it?

 

http://www.redshiftmotorsports.com lca exhaust.

 

would u like everything spoon fed to you, or would you like to do a little research?

 

wow...what do u think i have been doin the past few days..and if u dont have somthin to say thats gonna help...y waste ur time raggin on people?...you dont have anything better to do?