Ok... trying to clean up a bit...

Some of the stuff is getting cleaned right now, so it's not all dirty when you get it... just has a lot of oil and stuff from being in a dirty engine bay.

D16Z6 head, mild P&P, Ferrea Valvetrain with 1mm oversized valves, springs, retainers and keepers, Crower Stage 3 cam, adjustable cam gear. $800 OBO.










VTEC valve cover for SOHC VTEC, $50 OBO




D16Z6 distributor with MSD cap. Can swap for the regular cap and stock ignitor as well. $100 OBO





D series Skunk2 intake manifold with B&M FPR. The ports are gasket matched and the throttle body is bored to 70mm. Can use 65-70mm throttle body, $300 OBO.









D series intake manifold spacer gasket (5mm), $30 OBO




MSD "Super Conductor" 8mm SOHC VTEC spark plug wires, $50 OBO.



D15 Cx pulley, lightest OEM D series pulley, $20 OBO.



Arias 75mm 11.5:1 forged pistons, attached to Eagle H beam rods with the ARP rod bolts (2000 or whatever they came with). They have about 10k miles on them and are in good shape. $750 OBO





Fidanza 7lb flywheel with replaceable friction surface, 6 puck sprung clutch and pressure plate, mated set. $500 OBO








I also have a Z6 block, it doesn't have the crank but I have the main girdle for it. It's got a Golden Eagle block guard, ARP head studs, bored to 75.5mm, and the bottom end it already clearanced for the ARP rod bolts in the Eagle rods. I'll take some pictures of this soon once it's cleaned up a bit. $300 OBO.

 

Bump for some nice parts!

 

bump wish i had the money nice stuff

 

bump

 

bump... good quality parts

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by downest &raquo;</TD></TR><TR><TD CLASS="quote">bump... good quality parts </TD></TR></TABLE>

Yippie used parts at new part prices just what I like......

 

who ported the head? any reciepts/vouches? what kind of springs/retainers?

williing to work on the price?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Natural Aspirations &raquo;</TD></TR><TR><TD CLASS="quote">

Yippie used parts at new part prices just what I like......</TD></TR></TABLE>

That's why it's best offer, but thanks for the bump. I posted it on another forum that requires prices so it's highballed a little.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wfocrx &raquo;</TD></TR><TR><TD CLASS="quote">who ported the head? any reciepts/vouches? what kind of springs/retainers?

williing to work on the price?</TD></TR></TABLE>

These belong to my roommate, and yes I believe he has all the receipts. I'm willing to work on the prices of course, that's why they are "OBO". AFAIK all the work was done by a local shop here in Brevard County, I will get the info from him if you really want it, he's out in San Diego for a week or two, but I can call him and ask.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Natural Aspirations &raquo;</TD></TR><TR><TD CLASS="quote">

Yippie used parts at new part prices just what I like......</TD></TR></TABLE>

Lol.

 

pm'd

 

bump

 

bump