FS: 98-1040 Rebuild Project
SOLD
Selling my project due to personal reasons: Less hours at work makes paying for bills, school, and this project an additional burden. Also, I now have the opportunity to build a 2 car garage at my parents house which would make picking up another itr much easier in the near future after college.
Car was purchased in July 07' as a rolling shell, missing wheels and swap.





Significant Facts:
-Clean title
-Matching odometer with mileage
-Matching Badge
*These 3 items are extremely important in terms of a full restoration and should not be overlooked*
Since its purchase I have made very minor progress on the car:
-OEM 98' Wheels
-OEM 98' CW rear bumper
-removed stickers
-cleaned/degreased engine bay.
Mods:
-Koni Yellow Shocks
-Skunk2 Adj. Coil Springs
-Skunk2 Lower Tie Bar
-Skunk2 CF Eyelids
The car is only missing the following:
-Motor, transmission, axles, mounts, shiftlinkage, ecu
-Radiator
-Exhaust
-Front Seats
-Pass. Floor mat
Items availible that were purchased for this project:
-B18C1 longblock *spun rod bearing
-Engine harness
Asking $4400obo
Modified by coolhandluke at 6:05 PM 10/7/2007
Modified by coolhandluke at 6:06 PM 10/7/2007
Modified by coolhandluke at 6:29 PM 10/7/2007
Modified by coolhandluke at 6:30 PM 10/7/2007
Modified by coolhandluke at 6:57 PM 10/10/2007
Modified by coolhandluke at 3:13 PM 10/18/2007
Modified by coolhandluke at 3:13 PM 10/18/2007
Modified by coolhandluke at 3:03 PM 10/19/2007
Selling my project due to personal reasons: Less hours at work makes paying for bills, school, and this project an additional burden. Also, I now have the opportunity to build a 2 car garage at my parents house which would make picking up another itr much easier in the near future after college.
Car was purchased in July 07' as a rolling shell, missing wheels and swap.





Significant Facts:
-Clean title
-Matching odometer with mileage
-Matching Badge
*These 3 items are extremely important in terms of a full restoration and should not be overlooked*
Since its purchase I have made very minor progress on the car:
-OEM 98' Wheels
-OEM 98' CW rear bumper
-removed stickers
-cleaned/degreased engine bay.
Mods:
-Koni Yellow Shocks
-Skunk2 Adj. Coil Springs
-Skunk2 Lower Tie Bar
-Skunk2 CF Eyelids
The car is only missing the following:
-Motor, transmission, axles, mounts, shiftlinkage, ecu
-Radiator
-Exhaust
-Front Seats
-Pass. Floor mat
Items availible that were purchased for this project:
-B18C1 longblock *spun rod bearing
-Engine harness
Asking $4400obo
Modified by coolhandluke at 6:05 PM 10/7/2007
Modified by coolhandluke at 6:06 PM 10/7/2007
Modified by coolhandluke at 6:29 PM 10/7/2007
Modified by coolhandluke at 6:30 PM 10/7/2007
Modified by coolhandluke at 6:57 PM 10/10/2007
Modified by coolhandluke at 3:13 PM 10/18/2007
Modified by coolhandluke at 3:13 PM 10/18/2007
Modified by coolhandluke at 3:03 PM 10/19/2007
Man, this car has so much potential. It's the PERFECT Type-R build project, matching odometer, original badge number (Rare as hell to see in a stripped caR), and a clean title.
If I were in the situation to, I'd pick this thing up right now for that price.
Nice caR project, good luck with the sale.
If I were in the situation to, I'd pick this thing up right now for that price.
Nice caR project, good luck with the sale.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94rs-turbo »</TD></TR><TR><TD CLASS="quote">damn i want it
story on the car?</TD></TR></TABLE>
Long story short: Car was built for a local by InlineProand had close to ~550whp. The car was in immaculate shape and a gem. Car was traded for a R33 skyline and blown up by the new owner about a week later. From there it traded hands 3-4 times losing most of its fine parts (luckily I was able to get the Recaros in between) and it landed in my hands.
As others have stated, this car is the perfect project rebuild due to its clean title, original badge, and cluster indicating every mile.
For a full Carfax:
http://www.carfax.com/viewEmai...CTSi3
I think the price is extremely fair, and I will only be selling after speaking with the buyer (not just "hey...you want this car.") and making sure they have plans to rebuild it and keep it safe.
I'v gotten a couple of PM's which already has me getting a pitt in my stomach
story on the car?</TD></TR></TABLE>
Long story short: Car was built for a local by InlineProand had close to ~550whp. The car was in immaculate shape and a gem. Car was traded for a R33 skyline and blown up by the new owner about a week later. From there it traded hands 3-4 times losing most of its fine parts (luckily I was able to get the Recaros in between) and it landed in my hands.
As others have stated, this car is the perfect project rebuild due to its clean title, original badge, and cluster indicating every mile.
For a full Carfax:
http://www.carfax.com/viewEmai...CTSi3
I think the price is extremely fair, and I will only be selling after speaking with the buyer (not just "hey...you want this car.") and making sure they have plans to rebuild it and keep it safe.
I'v gotten a couple of PM's which already has me getting a pitt in my stomach
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GO-FIGHT-KILL »</TD></TR><TR><TD CLASS="quote">Trade me for my Prelude.
</TD></TR></TABLE>
Only if the non-prelude misc. comes with the deal
</TD></TR></TABLE>Only if the non-prelude misc. comes with the deal
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doespike »</TD></TR><TR><TD CLASS="quote">Damn! This is really tempting for myself! hmmmmm
</TD></TR></TABLE>
Hey you're the man too!
</TD></TR></TABLE>Hey you're the man too!
If you posted this a couple weeks earlier it would have been sold!!
gl with the sale, this is a DEAL!!!
But hopefully it comes to Iowa!!
gl with the sale, this is a DEAL!!!
But hopefully it comes to Iowa!!
Good deal.
I wish I could of found a clean title shell after my first ITR was totaled, it would of saved me a lot of money. Good luck with the sale.
I wish I could of found a clean title shell after my first ITR was totaled, it would of saved me a lot of money. Good luck with the sale.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CHR!S »</TD></TR><TR><TD CLASS="quote">good luck with the sale, ill talk to my friend whos looking for an itr shell to build for a racecar
</TD></TR></TABLE>
I'd appreciate any help. Thanks.
</TD></TR></TABLE> I'd appreciate any help. Thanks.
More pictures have been added to this listing. I am ready for this to move, so if you are wanting the car without any items please send me your offer. Please note, that does NOT mean I am parting the car out.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coolhandluke »</TD></TR><TR><TD CLASS="quote">My buyer has back out, please feel free to PM me if you are interested and I will give you my cell.</TD></TR></TABLE>
that sucks
gl with the sale
that sucks
gl with the sale
Car is Sold.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEC_Club »</TD></TR><TR><TD CLASS="quote">I wonder how much shipping would be to california?
</TD></TR></TABLE>
Estimates for other members were in the $600 range.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEC_Club »</TD></TR><TR><TD CLASS="quote">I wonder how much shipping would be to california?
</TD></TR></TABLE>Estimates for other members were in the $600 range.
Thread
Thread Starter
Forum
Replies
Last Post




