FS: B Series Parts (TN)
Time to get this stuff out of my garage.
$350 - Used Honda B16 (PR3) cylinder head. Approximately 40,000 miles. Came off my '00 Si. Perfect for a hybrid build or swap. The o-ring and dowel pin that go under the center cam cap have been lost. You can get these from Honda for about $5.00. Also, the intake and exhaust manifold studs/bolts were reused for another project I did. You can get them cheap at an auto parts store.


$25 - Used Honda B16 intake manifold. Shown in pic above. Same mileage as the head.
$175 - Brand new JimFab motor mounts. These went out of production a while ago, much to the dismay of Honda/Acura owners. They have the red "street" bushings. Fits '96-'00 Civics and '94-'01 Integras.

$5 - Brand new miscellaneous OEM Honda gaskets and o-rings. There's cam seals, VTEC solenoid gasket, etc.

$5 each or $15 for all four - Brand new in sealed package, 6.5" buffing pads for PC7424. 3 of the pads are the "white" mild cut and 1 is a "black" glazing pad. Velcro backing already attached.

PM or email me. Prices DO NOT include shipping. I'll gladly ship anything at the buyer's expense. If you live in the middle TN area, local pick-up/delivery is available.
$350 - Used Honda B16 (PR3) cylinder head. Approximately 40,000 miles. Came off my '00 Si. Perfect for a hybrid build or swap. The o-ring and dowel pin that go under the center cam cap have been lost. You can get these from Honda for about $5.00. Also, the intake and exhaust manifold studs/bolts were reused for another project I did. You can get them cheap at an auto parts store.


$25 - Used Honda B16 intake manifold. Shown in pic above. Same mileage as the head.
$175 - Brand new JimFab motor mounts. These went out of production a while ago, much to the dismay of Honda/Acura owners. They have the red "street" bushings. Fits '96-'00 Civics and '94-'01 Integras.

$5 - Brand new miscellaneous OEM Honda gaskets and o-rings. There's cam seals, VTEC solenoid gasket, etc.

$5 each or $15 for all four - Brand new in sealed package, 6.5" buffing pads for PC7424. 3 of the pads are the "white" mild cut and 1 is a "black" glazing pad. Velcro backing already attached.

PM or email me. Prices DO NOT include shipping. I'll gladly ship anything at the buyer's expense. If you live in the middle TN area, local pick-up/delivery is available.
Thread
Thread Starter
Forum
Replies
Last Post
Sir v tec
Honda Civic / Del Sol (1992 - 2000)
3
Apr 8, 2008 10:12 AM



