Hey whats up i have just swapped motors d15b2 to a d16a6 and am wondering if it is a plug n play swap or if i need to do any wiring changes due to the fact that the old motor was a dual point and now i have a multi point? I recieved the complete engine and trans, along with the ECU and wiring harness. Any help will be awesome!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88buildup &raquo;</TD></TR><TR><TD CLASS="quote">Any help will be awesome!</TD></TR></TABLE>

Searching would be even awesomer!!! lmfao.

 

You need to do a MPFI swap. Read the links in the FAQ and you won't go wrong.

 

https://honda-tech.com/zerothread?id=639552 and http://www.angelfire.com/d20/h....html should be very helpful good luck

 

^^^ your 1st real post that made sense... congrats

 

So from now this is how i will roll copy and paste write up thanks it guy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IT GUY &raquo;</TD></TR><TR><TD CLASS="quote">^^^ your 1st real post that made sense... congrats</TD></TR></TABLE>

Awesome comment ha ha