<<<95 eg hatch FOR SALE>>> GSR
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 353
Likes: 0
From: under ur girl, US
<<<95 eg hatch FOR SALE>>> GSR south jersey
SOLD 
wats up guys ... im sellin my 95 eg hatch....
i need money to get outa debt and move outa my house so i need this thing gone asap....
list of mods are as follows...
jdm gsr with lsd trans
exedy stage 2 w/ act 12ld flywheel
super tech flat faced valves, super tech springs and retainers
stock gsr cams
mugen headgasket
skunk 2 intake manifold
rc 370 cc injectors
golden eagle fuel rail
stock bottom end
chipped p28 with a 9k red line no launch control
v tech is not wired yet...
the body of the car is stock.... its got a new hood and front bumper and amber corners....
its lowerd on h & r springs and stock struts
the trans was rebuilt with carbon syncros but still has a 2nd gear grind... not sure y maybe a bent fork or the linkage is twisted... i havent looked....
as u can see the interior is clean n very well mainted...
since the head was rebult it has about 200 miles on it .....
def runs good for bein untuned...
im lookin to get out wat i out in hopefully but im open for offers..
$$$$$$$ BEST OFFER
u can pm me here or AIM me at pssh420a
Modified by ebpEM1_DJ at 7:22 PM 9/27/2007
Modified by ebpEM1_DJ at 5:29 AM 10/17/2007
wats up guys ... im sellin my 95 eg hatch....
i need money to get outa debt and move outa my house so i need this thing gone asap....
list of mods are as follows...
jdm gsr with lsd trans
exedy stage 2 w/ act 12ld flywheel
super tech flat faced valves, super tech springs and retainers
stock gsr cams
mugen headgasket
skunk 2 intake manifold
rc 370 cc injectors
golden eagle fuel rail
stock bottom end
chipped p28 with a 9k red line no launch control
v tech is not wired yet...
the body of the car is stock.... its got a new hood and front bumper and amber corners....
its lowerd on h & r springs and stock struts
the trans was rebuilt with carbon syncros but still has a 2nd gear grind... not sure y maybe a bent fork or the linkage is twisted... i havent looked....
as u can see the interior is clean n very well mainted...
since the head was rebult it has about 200 miles on it .....
def runs good for bein untuned...
im lookin to get out wat i out in hopefully but im open for offers..
$$$$$$$ BEST OFFER
u can pm me here or AIM me at pssh420a
Modified by ebpEM1_DJ at 7:22 PM 9/27/2007
Modified by ebpEM1_DJ at 5:29 AM 10/17/2007
Re: <<<95 eg hatch FOR SALE>>> GSR (ebpEM1_DJ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebpEM1_DJ »</TD></TR><TR><TD CLASS="quote">as u can see the interior is clean n very well mainted... </TD></TR></TABLE>
see what?
see what?
Trending Topics
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 353
Likes: 0
From: under ur girl, US
Re: (StreetEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StreetEG »</TD></TR><TR><TD CLASS="quote">PM me a ballpark. Interested...also as much info on the motor as possible</TD></TR></TABLE>
pm'd back
bump
pm'd back
bump
Honda-Tech Member
Joined: Feb 2006
Posts: 528
Likes: 0
From: Waynesboro, PA, USA
Re: (ebpEM1_DJ)
pm me a ballpark price too... body looks a little rough. Why no VTEC? Did you change the synchro sleeves and check the needle bearings, etc... while inside the tranny? Where are you located... I'm in lower PA so I don't want to drive too far?
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 353
Likes: 0
From: under ur girl, US
Re: (92_VX_EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92_VX_EG »</TD></TR><TR><TD CLASS="quote">pm me a ballpark price too... body looks a little rough. Why no VTEC? Did you change the synchro sleeves and check the needle bearings, etc... while inside the tranny? Where are you located... I'm in lower PA so I don't want to drive too far?</TD></TR></TABLE>
ehhh the bodys not too bad... it does have rust on the left quarter and a few dents but for the most part its not horrible...
the vtec wire isnt ran from the solenoid to the ecu yet..... the stock cx harness is used not a gsr harness....
ummm i really didnt check too much when i had the trans apart... it was my first tranny rebuild sooo.... all i did was replace the syncros....
im in south jersey by atco raceway....
pm'd u
Modified by ebpEM1_DJ at 6:18 AM 10/1/2007
ehhh the bodys not too bad... it does have rust on the left quarter and a few dents but for the most part its not horrible...
the vtec wire isnt ran from the solenoid to the ecu yet..... the stock cx harness is used not a gsr harness....
ummm i really didnt check too much when i had the trans apart... it was my first tranny rebuild sooo.... all i did was replace the syncros....
im in south jersey by atco raceway....
pm'd u
Modified by ebpEM1_DJ at 6:18 AM 10/1/2007
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 353
Likes: 0
From: under ur girl, US
Re: (tai....)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tai.... »</TD></TR><TR><TD CLASS="quote">bump for a hoe!! lol</TD></TR></TABLE>
thanks i love u too....
topppp
thanks i love u too....
topppp
Junior Member
Joined: Jan 2007
Posts: 970
Likes: 0
From: all over, new jersey, UnitedStates
Re: <<<95 eg hatch FOR SALE>>> GSR south jersey (ebpEM1_DJ)
PM me a ballpark as well and you got any pics of the rust on the quarter you were talkin about cus i dont see it in the pics..
Thread
Thread Starter
Forum
Replies
Last Post
92_VX_EG
Northeast (Sales)
4
Dec 28, 2007 05:03 PM
92_VX_EG
Mid-Atlantic (Sales)
2
Dec 28, 2007 05:01 PM
boosted hybrid
Forced Induction
54
Apr 30, 2005 06:17 PM