Post up your stock boosted B series dynos!
Bone-Stock GSR, Stock Intake Manifold, Stock Throttle Body
ARP Headstuds, RC 750cc, Walbro 255lph HP, Full-Race Stage 2GT Kit, Thermal Exhaust, TurboXS Dual Stage, Neptune
The car went 10.92 @ 133.
Old Setup
ARP Headstuds, RC 750cc, Walbro 255lph HP, Full-Race Stage 2GT Kit, Thermal Exhaust, TurboXS Dual Stage, Neptune
The car went 10.92 @ 133.
Old Setup
stock sohc gt28r

stock b16

stock ls motor with 4 lbs of boost LOL (dont ask long story---yes it was like that on purpose)

i dont really have any of my stock stuff uploaded on this computer

stock b16

stock ls motor with 4 lbs of boost LOL (dont ask long story---yes it was like that on purpose)

i dont really have any of my stock stuff uploaded on this computer
Trending Topics
Stock B16A2
Garrett T3/T04E 60 Trim, .63a/r
AFI Ramhorn A/C Mani
AFI 3' Downpipe, Dumptube
Tial 38mm WG
Tial 50mm BOV
Precision 780cc Injectors
Yonaka Intercooler Type 10 22x9x3-inch
Spoolin PerFormance Intercooler Piping,2.25' Cold, 2' Hot
Turbo Xs Manual Boost Controller
GE Sandwich Plate Adapter
GE Vaccum Mani
Fast-Turbo Oil Line Kit
Greddy Catchcan
Walbro 255 Fuel Pump
Comp. Stage 4 Sprung Clutch
Defi D Gauges, Boost, Oil Pres., EGT
Tuned on Crome Pro
283.67hp, 197.96tq, 9.5 psi
Garrett T3/T04E 60 Trim, .63a/r
AFI Ramhorn A/C Mani
AFI 3' Downpipe, Dumptube
Tial 38mm WG
Tial 50mm BOV
Precision 780cc Injectors
Yonaka Intercooler Type 10 22x9x3-inch
Spoolin PerFormance Intercooler Piping,2.25' Cold, 2' Hot
Turbo Xs Manual Boost Controller
GE Sandwich Plate Adapter
GE Vaccum Mani
Fast-Turbo Oil Line Kit
Greddy Catchcan
Walbro 255 Fuel Pump
Comp. Stage 4 Sprung Clutch
Defi D Gauges, Boost, Oil Pres., EGT
Tuned on Crome Pro
283.67hp, 197.96tq, 9.5 psi
261.95 hp and 173.60 ft-lbs at 7-8psi

<U>Engine</U>
JDM B16a (stock)
ACT Heavey Duty Pressure Plate
ACT Organic Street Disc
Full-Race ProStreet Manifold
Full-Race 3" down pipe
Thermal R&D 3" Exhaust
3" Kteller test pipe
Garrett T3/T4 60 Trim
Precision 350 Intercooler
Tial 44mm Wastegate
Tial 50 mm BOV
3bar MAP Sensor
GE Vacuum Manifold
Walbro 255 fuel pump
RC 750 injectors
Endyn Oil Sandwich Plate
AEM Wideband
AEM Boost Gauge
AEM Oil Pressure Gauge
P06 chipped to P28 w/ Crome

<U>Engine</U>
JDM B16a (stock)
ACT Heavey Duty Pressure Plate
ACT Organic Street Disc
Full-Race ProStreet Manifold
Full-Race 3" down pipe
Thermal R&D 3" Exhaust
3" Kteller test pipe
Garrett T3/T4 60 Trim
Precision 350 Intercooler
Tial 44mm Wastegate
Tial 50 mm BOV
3bar MAP Sensor
GE Vacuum Manifold
Walbro 255 fuel pump
RC 750 injectors
Endyn Oil Sandwich Plate
AEM Wideband
AEM Boost Gauge
AEM Oil Pressure Gauge
P06 chipped to P28 w/ Crome
Honda-Tech Member
iTrader: (1)
Joined: May 2002
Posts: 1,056
Likes: 0
From: Lower East Side Holly, PA, usa
stock b18c1, Garrett t3/t04 60 trim .63 a/r, ebay cast manifold, blox IM, 68mm TB, itr cams and valve springs, 3inch DP, Apexi ws exhaust, EVO 8 BOV, TiAl 38mm WG, DSM 440's, 255 fuel pump.
10psi
So far ran a 12.26 @ 120mph with 2.115 60'.
10psi
So far ran a 12.26 @ 120mph with 2.115 60'.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr HYDE »</TD></TR><TR><TD CLASS="quote">i made this same thread and they ******* deleted it </TD></TR></TABLE>well if you keep making post like this they will do it again.some really nice numbers for stock b series engine's
stock jdm ls gsr tranny greddy kit/450cc/neptune 200whp 198wtq @ 11psi
stock gsr ramhorn t3/t04e .48 /750cc/neptune 316whp 220wtq
stock gsr log mani 50trim .48/780cc/neptune 299whp 217wtq
stock gsr ramhorn t3/t04e .48 /750cc/neptune 316whp 220wtq
stock gsr log mani 50trim .48/780cc/neptune 299whp 217wtq




