Built NA D-series stuff
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 191
Likes: 0
From: Mira Loma, CA
Built NA D-series stuff
None of these parts have been run since being rebuilt with the exception of the driveline components. All items are OBO. Shipping is buyers problem you figure out what it costs to ship from 91761
I had built a honda challenge engine, decided to change set up.
D16A6 Block bored .5mm over with P29 pistons brand new seals/gaskets/bearings/hardware. Unassembled Asking $650
D16Z6 head new valves / seals and retainers. Crower STG 3 cam and valve springs / adj cam gear / vtec solonoid / Portmatched Y8 manifold w/ B16 TB / polised OEM fuel rail B&M FPR Port work by Alaniz (steet)http://www.alaniztechnologies.com/ho...aservices.html
Yours $1800 obo
D-series tranny fully rebuilt Si case with ZC 1-5 gearset and 4.43 FD With fidanza 6lbs flywheel and ACT PP & 4 puck unsprung disc. Gear ratios as follows:
1 - 3.250
2 - 1.900
3 - 1.346
4 - 1.033
5 - .878
FD - 4.43 <--that's not a misprint
$1200 obo
Zdyne SECU - 300 obo
Rear disc swap - $150
16" DTM P1 rims w/ tires (205-45-16) 90% tread $250
14" stock CRX Si Sawblades w/ **** tires $80
unpainted new CRX SE wing $100
L3 trans Si gearset w/ 4.25 FD $100
More to come...
Modified by n-c at 2:50 AM 9/26/2007
I had built a honda challenge engine, decided to change set up.
D16A6 Block bored .5mm over with P29 pistons brand new seals/gaskets/bearings/hardware. Unassembled Asking $650
D16Z6 head new valves / seals and retainers. Crower STG 3 cam and valve springs / adj cam gear / vtec solonoid / Portmatched Y8 manifold w/ B16 TB / polised OEM fuel rail B&M FPR Port work by Alaniz (steet)http://www.alaniztechnologies.com/ho...aservices.html
Yours $1800 obo
D-series tranny fully rebuilt Si case with ZC 1-5 gearset and 4.43 FD With fidanza 6lbs flywheel and ACT PP & 4 puck unsprung disc. Gear ratios as follows:
1 - 3.250
2 - 1.900
3 - 1.346
4 - 1.033
5 - .878
FD - 4.43 <--that's not a misprint
$1200 obo
Zdyne SECU - 300 obo
Rear disc swap - $150
16" DTM P1 rims w/ tires (205-45-16) 90% tread $250
14" stock CRX Si Sawblades w/ **** tires $80
unpainted new CRX SE wing $100
L3 trans Si gearset w/ 4.25 FD $100
More to come...
Modified by n-c at 2:50 AM 9/26/2007
Thread
Thread Starter
Forum
Replies
Last Post
JDM-JAMES
Southern California (Sales)
22
Sep 26, 2009 10:24 PM
SPOON_BeIgHtEeNsEe
Northwest (Sales)
0
May 9, 2006 12:36 PM