For a 1998 Civic Cat, what is the inlet?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondamanXxX &raquo;</TD></TR><TR><TD CLASS="quote">For a 1998 Civic Cat, what is the inlet? </TD></TR></TABLE>
stock d series engine with stock header or ?

 

Im asking because I'm thinkg about buying LS header for my GSR swap and just wondering what outlet size I need to fit up directly to the stock Civic Cat

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondamanXxX &raquo;</TD></TR><TR><TD CLASS="quote">Im asking because I'm thinkg about buying LS header for my GSR swap and just wondering what outlet size I need to fit up directly to the stock Civic Cat</TD></TR></TABLE>

it'll be a straight bolt on, nothing to worry about.

 

The headers are a 2.1 outlet. When I match it up with the cat it does not fit. Bolted it up and it leaked out. Then I took it back off and I measured both outlets and the stock GSR headers are smaller then these LS headers. I beleive I need 2.0 outlet headers.

 

Bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondamanXxX &raquo;</TD></TR><TR><TD CLASS="quote">Bump</TD></TR></TABLE>

it's been 21 minutes since your last reply...

 

And my car is sitting outside in pieces. Thanks for letting me know.

 

Is it ok if I bump for an answer Bense?