EG Hatch fs/ft
i have a 92' civic hatch with a built ls-vtec turbo built and ported gsr head and an ls block with block gaurd and eagle rods with supertech pistons acl bearings, aebs head bolts, cometic head gasket, plus much more. the turbo set up is a garret 60-1 turbo with an 70ar compressor housing and 84 exhaust. it has hondata s300 with the incorperated hondata electronic boost controller. pression 780cc injectors walbro 255 aem fuel rail b&m fpr and tons more. the down side to this is that it has a cracked sleeve. the number 3 cylinder is cracked the motor only has 1000 miles on it and was tuned very conservativly and ran awsome for the 1000 miles of mostly break in. i think that the machineing may have been the problem but im not going to point any fingers. right at the moment i have no money to sleeve the block but thats all it needs to be done. let me know if you are interested or have any trades. cars, trucks, bikes anything. e-mail me at webber17@hotmail.com thanks, mitch i have pics just e-mail me
Thread
Thread Starter
Forum
Replies
Last Post
tannerLSt
Forced Induction
102
Apr 13, 2006 02:51 PM




