what clutch for this setup?
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 603
Likes: 0
what clutch for this setup?
engine:
2004 k20a2
hasport ekk1 mount
hasport engine harness
golden eagle sleeved
head ported by portflow (stage 1)
arias 86.5 11.5 comp pistons
ips k2 cams
eibach springs and ti retainer
dtr header
3in madrel bend kteller exhaust
2 vibrant resonator 12" and 18"
magnaflow muffler tucked with turn down tip
holly fuel pump
aem fuel pressure regulator
golden eagle fuel rail
short ram intake with ptr velocity stack and k&n filter
rbc mani
rc bored throttle bidy
speedwerx adapter
rdx injectors
hondata kpro
it puts about 232 whp and 160 tq.
2004 k20a2
hasport ekk1 mount
hasport engine harness
golden eagle sleeved
head ported by portflow (stage 1)
arias 86.5 11.5 comp pistons
ips k2 cams
eibach springs and ti retainer
dtr header
3in madrel bend kteller exhaust
2 vibrant resonator 12" and 18"
magnaflow muffler tucked with turn down tip
holly fuel pump
aem fuel pressure regulator
golden eagle fuel rail
short ram intake with ptr velocity stack and k&n filter
rbc mani
rc bored throttle bidy
speedwerx adapter
rdx injectors
hondata kpro
it puts about 232 whp and 160 tq.
Honda-Tech Member
Joined: May 2005
Posts: 259
Likes: 0
From: Tacompton, WA, U.S
Re: what clutch for this setup? (CeeJayy)
What will the motor be used for? Street machine, daily, race car? Id say dont skimp out on the clutch. Looks like you got a lot of high quality parts there. Act 6 puck with xtreme PP would be my choice. Nice and stiff but still very streetable. Grabs real nice. 
Honda-Tech Member
Joined: Jan 2005
Posts: 1,233
Likes: 0
From: fresno, CA
Thread
Thread Starter
Forum
Replies
Last Post
crazydominicanman
All Motor / Naturally Aspirated
29
Jan 31, 2010 10:20 AM