does anybody have any experiences with this frankenstien motor.. i calculated the compression ratio to be about 11.5:1...i have a stock cam for it right now, and no mods except for the y8 manifold..

 

its not an upgrade at all. SOHC ZC and A6 are the same motor.

 

How did you calculate 11 5 1 compression.?

 

11.5:1? yeah, how did u get that exactly??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by garageEF &raquo;</TD></TR><TR><TD CLASS="quote">its not an upgrade at all. SOHC ZC and A6 are the same motor.</TD></TR></TABLE>

wAIT...they are the same, only difference is the CAMS....zc have HOTTER cams than the A6...therefore compression rating is bumped up sum...not sure the exact number, but DEFINATELY RAISES.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LatnKng &raquo;</TD></TR><TR><TD CLASS="quote">

wAIT...they are the same, only difference is the CAMS....zc have HOTTER cams than the A6...therefore compression rating is bumped up sum...not sure the exact number, but DEFINATELY RAISES. </TD></TR></TABLE> No, they're the same. Minor differences in the cam and possibly ECU programming make the extra power.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LatnKng &raquo;</TD></TR><TR><TD CLASS="quote">

wAIT...they are the same, only difference is the CAMS....zc have HOTTER cams than the A6...therefore compression rating is bumped up sum...not sure the exact number, but DEFINATELY RAISES. </TD></TR></TABLE>
ummmm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LatnKng &raquo;</TD></TR><TR><TD CLASS="quote">

wAIT...they are the same, only difference is the CAMS....zc have HOTTER cams than the A6...therefore compression rating is bumped up sum...not sure the exact number, but DEFINATELY RAISES. </TD></TR></TABLE>

Yeah sure it does.
Your info

 

i got the 11.5:1 from a calculating the cc of the head, the stroke, bore and so on.. there is a D series CR calculator on the zc website.. i just dont want to put it on tere and have the valves hit the pstons.. any idea what timing belt i would need?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef_zcvtec &raquo;</TD></TR><TR><TD CLASS="quote">i got the 11.5:1 from a calculating the cc of the head, the stroke, bore and so on.. there is a D series CR calculator on the zc website.. i just dont want to put it on tere and have the valves hit the pstons.. any idea what timing belt i would need?
</TD></TR></TABLE>

Its the same ******* motor dude. Buy parts for an A6, because thats what it is.

The zc cam is slightly taller lift, and slightly longer durration.

THAT IS THE ONLY MOTHER ******* DIFFERENCE.

 

HHAHAHA^^^^

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">

Its the same ******* motor dude. Buy parts for an A6, because thats what it is.

</TD></TR></TABLE>
/thread.

 

Honestly, I'm going to start reading locations on posters and then I'll know if it's worth reading.

It seems CA and WA have the stupidest freaking ricers ever.

Both are democrap filled west coast states, shocking.

I hope all that falls off and goes over to china, we don't want it. We'll take the north pole back from russia in a trade?

Ehh... worth a try.

 

Lol so true, most noob threads are made by us, no lie!

 

hey, first off, im not a ricer. second off all im just trying to get some god damn information. sorry if i do not know every-*******-thing about a honda, my bad, i guess i dont spend enough ******* hours looking at posts and writing bullshit, worthless replies..so fu*k you you piece of **** and f**k honda's.. im out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef_zcvtec &raquo;</TD></TR><TR><TD CLASS="quote">hey, first off, im not a ricer. second off all im just trying to get some god damn information. sorry if i do not know every-*******-thing about a honda, my bad, i guess i dont spend enough ******* hours looking at posts and writing bullshit, worthless replies..so expletive you you piece of **** and expletive honda's.. im out</TD></TR></TABLE> Hey, that's not nice.

*tear.

We were nice and told you the calc was wrong and they even say take with a grain of salt.

go find another 18 second car to putt around in flexing your arm out the roll down window, I really don't care.

PS... out of my 3 cars, only one is a Honda buddy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef_zcvtec &raquo;</TD></TR><TR><TD CLASS="quote">hey, first off, im not a ricer. second off all im just trying to get some god damn information. sorry if i do not know every-*******-thing about a honda, my bad, i guess i dont spend enough ******* hours looking at posts and writing bullshit, worthless replies..so fu*k you you piece of **** and f**k honda's.. im out</TD></TR></TABLE>Nice avatar man

 

This thread has made me Emo.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Maxidermist &raquo;</TD></TR><TR><TD CLASS="quote">This thread has made me Emo.



</TD></TR></TABLE>

BWHAHAHAHAHAHAHA.....like you workout, that equipment is there just for the photo op.