wtb steelbraided fuel line
im looking for the steel braided line that goes from the fuel rail to the fuel filters on the b series motors. anyone have on for sale?
PM me if you do, thanks
PM me if you do, thanks
If you take a picture of that area for me, I can see if the one I have will fit. Do you have an aftermarket fuel rail?
I have one that I made using Earl's fittings and adapters with the Pro-Lite hose. The line and hose-ends are -6AN.
Parts I used:
(1) 985006, -6AN Flare to -6AN O-Ring Port Adapter [alum]
(1) 991945, 12mm to -6AN Flare Adapter [alum]
(1) 815006, -6AN 150deg Hose-end
(1) 800106, -6AN straight Hose-end
(2ft) 350606, -6AN Prolite 350 Nomex Braided Hose
Asking price: $70 shipped
It was to be for the race car, but it needs something much bigger than -6AN now.
I have one that I made using Earl's fittings and adapters with the Pro-Lite hose. The line and hose-ends are -6AN.
Parts I used:
(1) 985006, -6AN Flare to -6AN O-Ring Port Adapter [alum]
(1) 991945, 12mm to -6AN Flare Adapter [alum]
(1) 815006, -6AN 150deg Hose-end
(1) 800106, -6AN straight Hose-end
(2ft) 350606, -6AN Prolite 350 Nomex Braided Hose
Asking price: $70 shipped
It was to be for the race car, but it needs something much bigger than -6AN now.
You'll need an aftermarket fuel rail like an AEM to use this line as is. Otherwise, you'll have to find a proper AN to banjo adapter.
Thread
Thread Starter
Forum
Replies
Last Post
Type-Spaz
Acura RSX DC5 & Honda Civic EP3
0
Mar 30, 2011 02:12 PM




