Top fuel has some type of looks like injectors or maybe water injectors on their intake, anyone knows what this is??

ill try to find pic
tomorrow


[Modified by Jordo, 2:15 AM 6/14/2002]

 

this is question two... what is that, and what do they do


question 3, what are the green hoses connected to??

 

JDM water purifier. It's only needed if you run JDM mountain spring water in your radiator though, so don't worry about it.

 

I think I've seen a turbo setup like that before where they used that as kinda a waste gate...

 

Didn't even see question #2, I'd guess those are BOv's.

 

they are addidtion injectors

 

Jordo those are additional fuel injectors. So that boost the total up to 6 fuel injectors. I've seen a better angle of it in my Hyper Rev and various Options and Revspeed magazines.

The thing that connects to the radiator looks like some type of catch can to relieve extra pressure in the radiator.

 

Those are bungs for a extra injectors but Top fuel no longer uses that setup since they upgraded the injectors to 850cc units. The can connected to the radiator is a pressure relief/air bleeder canister. That canister isn't necessary on Honda's since the cooling system is good but it's a must on SR's, RB's and rotor-motors.


[Modified by Dee, 8:01 AM 6/14/2002]


[Modified by Dee, 9:23 PM 6/14/2002]

 

thanx alot


dee - like always thanx alot

 

the green hosts are connected to the high pressure reserve coolant tank

 

the are just extra injectors, so u would have 6 instead of 4

 

Most tuners in Japan are getting away from extra injectors in the IC piping. Why? Because you do not get even fuel distribution, larger injectors are readily available and there are plenty of aftermarket ECU's that can control an extra injector for each intake runner.