so anyway i have another question about lowering using springs. i have narrowed it down to most likely skunk2, swift, or esplier (on stock struts). I baby this car, so there will be no track days, the springs are strictly cosmetic. My question is, do i need driveshaft spacers if i go with skunk2? nobody has been specific on how low is too low. any help would be appreciated. thanks

 

Spacers are recommended on AP1 - I would look into J's or Motorklasse. Honda did widen the AP2's OEM shafts. Many people have lowered it and had no problem - so it's just a recommendation if you're planning on going really low and need spacers - it's more preventive product then anything.

I don't think any spacers are needed when Skunk2 only drops 1". How low is too low depends on your ride preference.

 

you don't need spacers unless you are more than 1" drop.

 

but don't skunk2 drop it 2.0-2.25?

 

http://www.skunk2.com/images/s...g.gif

 

just ordered skunk2's. the site i ordered from said they fit 00-04. i have an 06, but the part # matched the one above for a 00-06 so hopefully they will be fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kawaboy14 &raquo;</TD></TR><TR><TD CLASS="quote">just ordered skunk2's. the site i ordered from said they fit 00-04. i have an 06, but the part # matched the one above for a 00-06 so hopefully they will be fine.</TD></TR></TABLE>

yeah youll be fine... but that site is a lie... your going to be dumped on the skunk2's wait until they settle and then go get an alignment... i went with the swifts... ill post pics after installation

 

ooooo oooooooo i ordered epelir asd's for my ap1 and i wana post pics too. I just dont know when they are going to come in.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black S2K &raquo;</TD></TR><TR><TD CLASS="quote">ooooo oooooooo i ordered epelir asd's for my ap1 and i wana post pics too. I just dont know when they are going to come in.</TD></TR></TABLE>

we just installed them on my friends AP1... they make the car look ****** awesome... ur rear camber is going be all out of whack, so make sure u get an alignment about a week after...

 

yeah ya'll gotta post pics, i couldn't decide between the three, but all the pics i have seen with skunk2's i love, let me know how the swifts and esplier's are.

 

well ill be doing mine any day now so ill def let you know... and ill take some pics of my boys AP1 with espeliers...

 

skunks deff. slam the car....i didn't get spacers and haven't had a problem. . . . .

 

the day that i get them i will post pics (before/after) can't wait

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S2KILLA &raquo;</TD></TR><TR><TD CLASS="quote">

we just installed them on my friends AP1... they make the car look ****** awesome... ur rear camber is going be all out of whack, so make sure u get an alignment about a week after...</TD></TR></TABLE>

Fattt guyyy on a little hub

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95excoupe &raquo;</TD></TR><TR><TD CLASS="quote">

Fattt guyyy on a little hub </TD></TR></TABLE>

expletive you nucca... if it wasnt for my fat ***, you wouldnt have completed ur suspension... we still doing mine after work on monday???

 

espeliers

 

swifts. after the alignment track the sh*t.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fridaytech &raquo;</TD></TR><TR><TD CLASS="quote">swifts. after the alignment track the sh*t.....</TD></TR></TABLE>

good advice from a good guy...

also you have PM friday...