what to do for sups on a 1990 std hatch
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 377
Likes: 0
From: festus, missouri, usa
what to do for sups on a 1990 std hatch
Im going to set this car for hpde and wanted some tips. Ive done a ton of searching but to many conflicting answers. I know what suspension im going to run but what about the reat sway? The car as most know dont have the parts to hook up one. I cant find and Si stuff to buy. Should i A. go with da stuff in the rear? or B. is there a aftermarket option?
If i do got with da stuff will i have to use da struts in the rear? Thanks for the help guys
If i do got with da stuff will i have to use da struts in the rear? Thanks for the help guys
Honda-Tech Member
Joined: Oct 2001
Posts: 6,805
Likes: 1
From: building H2 cars, NY
Re: what to do for sups on a 1990 std hatch (junkyard racer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by junkyard racer »</TD></TR><TR><TD CLASS="quote"> 
<- click</TD></TR></TABLE>
x2
<- click</TD></TR></TABLE>x2
Honda-Tech Member
Joined: Jun 2002
Posts: 3,830
Likes: 0
From: YEAH HO, FRISCO, NORCAL
Re: what to do for sups on a 1990 std hatch (Lo-Buck EF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lo-Buck EF »</TD></TR><TR><TD CLASS="quote">
x2</TD></TR></TABLE>
X3
x2</TD></TR></TABLE>
X3
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 377
Likes: 0
From: festus, missouri, usa
This car mainly is setup for auto-x. I had a nissan se-r so im not really new to the track just new to the honda on the track. My settings were much diffrent for hpde then auto-x maybe the honda is diffrent. And to address my initial question. This guy only speaks about the si. I have a std and do not have the sway hookups he was suggesting like an si does. If i could find si parts or equivalent to buy i would not be asking the question at all. Thanks for the help anyway.
Thread
Thread Starter
Forum
Replies
Last Post