b16 head, type r cams, turbo manifold, turbos, del sol stuff, garage sale!
Thread Starter
Honda-Tech Member
Joined: May 2004
Posts: 938
Likes: 0
From: In 1 ear and out your mother, NJ
b16 head, type r cams, turbo manifold, turbos, del sol stuff, garage sale!
**EVERYTHING ACCEPT THE HEAD IS B/O**
Head. 89 jdm b16 head with port and polish and 3 angle valve job. brand new itr springs retainers and valves. I purchased the head and installed with out bringing to a machine shop. The head runs quiet but smokes. My guess is either a valve guide or valve stem seal. Ideally just bring it to a machine shop and have them replace the guides and seals and i would deck it flat to just to make sure. All head needs
aside from that is a few bolts and a vc. Comes with stock b16 cams, vtec solenoid, coolant neck, and cam covers. pick it up for cheap here, spend another 100-200 and your ready to go. $600 or B/O
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
stock b16 throttle body with tps
[IMG]
[/IMG]
Stock Del sol Dash, includes climate control, and all vents -
[IMG]
[/IMG]
Del sol/EG steering wheel and column, includes wiper and turn signal controls
[IMG]
[/IMG]
Del sol trunk roof holder thing -
[IMG]
[/IMG]
Turbo's both VW/Audi not sure of trims, minimal shaft play, and the watercooled one is t3 flanged -
[IMG]
[/IMG]
[IMG]
[/IMG]
Rev hard style B series turbo manifold, t3 flanged -
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Stock del sol front sway bar, no endlinks -
[IMG]
[/IMG]
EK front bumper support -
[IMG]
[/IMG]
del sol Manual steering rack -
[IMG]
[/IMG]
Del sol Rear Glass, with motor and wiring -
[IMG]
[/IMG]
Brand new 94-97 integra front bumper upper half -
[IMG]
[/IMG]
Stock del sol read bumper -
[IMG]
[/IMG]
****un pictured***** random del sol and DC interior pieces, PM for specifics.
Again all prices are open, and im willing to travel to meet
Easiest way to get to me is on AIM names - IVIcGurk
Modified by IVIcGurk at 4:31 PM 8/17/2007
Modified by IVIcGurk at 11:42 AM 8/23/2007
Modified by IVIcGurk at 5:53 PM 12/12/2007
Head. 89 jdm b16 head with port and polish and 3 angle valve job. brand new itr springs retainers and valves. I purchased the head and installed with out bringing to a machine shop. The head runs quiet but smokes. My guess is either a valve guide or valve stem seal. Ideally just bring it to a machine shop and have them replace the guides and seals and i would deck it flat to just to make sure. All head needs
aside from that is a few bolts and a vc. Comes with stock b16 cams, vtec solenoid, coolant neck, and cam covers. pick it up for cheap here, spend another 100-200 and your ready to go. $600 or B/O
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] stock b16 throttle body with tps
[IMG]
[/IMG] Stock Del sol Dash, includes climate control, and all vents -
[IMG]
[/IMG] Del sol/EG steering wheel and column, includes wiper and turn signal controls
[IMG]
[/IMG] Del sol trunk roof holder thing -
[IMG]
[/IMG] Turbo's both VW/Audi not sure of trims, minimal shaft play, and the watercooled one is t3 flanged -
[IMG]
[/IMG][IMG]
[/IMG] Rev hard style B series turbo manifold, t3 flanged -
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] Stock del sol front sway bar, no endlinks -
[IMG]
[/IMG] EK front bumper support -
[IMG]
[/IMG] del sol Manual steering rack -
[IMG]
[/IMG] Del sol Rear Glass, with motor and wiring -
[IMG]
[/IMG] Brand new 94-97 integra front bumper upper half -
[IMG]
[/IMG] Stock del sol read bumper -
[IMG]
[/IMG]****un pictured***** random del sol and DC interior pieces, PM for specifics.
Again all prices are open, and im willing to travel to meet
Easiest way to get to me is on AIM names - IVIcGurk
Modified by IVIcGurk at 4:31 PM 8/17/2007
Modified by IVIcGurk at 11:42 AM 8/23/2007
Modified by IVIcGurk at 5:53 PM 12/12/2007
