<FONT SIZE="4"> http://www.IPGParts.com </FONT>


Innes Performance Group, LLC
Contact – James Innes
Phone – 407-324-4684
Racing@IPGParts.com

Payment will be accepted at Paypal at Info@JamesInnesRacing.com, a credit card over the phone at 407-324-4684 or a money order.

Pics are available upon request -- Please email me for them at Racing@IPGParts.com and don't waste my time please -- be serious if you are looking for pictures

2006 NHRA SFWD Champion Car Part-Out

Supertech Performance: all Brand New – B Series Vtec Engines
(2) sets dual valve springs for B Series Vtec, H100DR -- $125 shipped
(2) sets of Ti Retainers for B, K, H Series engines, K20a2/T2 -- $150 shipped
(1) set of 8 0.5mm oversize, dished face, inconel exhaust valves -- $165/set

(4) Used, Carrillo GSR Billy Bad *** Connecting Rods, good condition, with SPS Carrbolts -- $500/set obo
(3) Used, Carrillo GSR Billy Bad *** Connecting Rods, need to be redone, with SPS Carrbolts -- $300/set obo

(1) Sleeved B18c1, GSR Block, AEBS Sleeves, brand new with copper O-rings, bare block with matching main caps and girdle – 84.5mm Bore -- SOLD
----Also have a set of pistons that this block is already bored and honed to, CP SC7021, 84.5mm Bore, 9.0:1 Compression – buy at the same time as block for SOLD



(1) Bone Stock 1998 GSR Transmission, never been opened up – great condition -- $650

(1) Used Tilton Twin Disc Clutch for B Series Hydro Transmission with 6 pound flywheel (part # 56-300) , only 1 season of racing on it – great condition, ready to run -- $950

(1) Fresh B16 Cylinder head, ported and polished by Ed’s Racing Heads, just redone, never used in current condition – complete Crower Valve Springs and Retainers installed, stock size valves, dual valve springs, ti retainers, new valve guides and valve stem seals – we made 750+ wheel horsepower with this cylinder head…was the head on the car during the 2006 championship season, has all matching internals and cam caps -- $1400

(1) set of used Ferrea Roller Rockers for B Series Vtec with (5) camshafts !!! Good condition – ready to run – I know (2) of the camshafts are the crane big turbo camshafts (Part # 253-0510) but not sure what the other 3 are – shouldn’t be that hard to figure out by calling crane but all (5) camshafts are the crane roller rocker camshafts, basically look at this as you are paying for the full ferrea roller setup with one pair of camshafts and getting 3 more for free – other people have made big power with the roller rocker setups, you can too !!! -- $1400



(1) ATI Dampener for B Series – one rib for alternator only – just rebuilt by ATI, no engine time on it since rebuild – used for the last 2 seasons before rebuild with no issues at all – works great and mandatory by the rules -- $325

(1) Freshly checked GSR crankshaft – in perfect condition – ready to run -- $200


(1) Brand new Quaife LSD for GSR/LS -- $850

(1) used Precision T4 GT4067 Turbocharger, journal bearing – this is the turbo we ran during our 2006 Championship season – great condition – ready to propel you to a 157 mph pass – spits a little oil in the compressor housing but has always done that to us, no shaft play, ready to run condition -- $780

(1) RPI Racing ramhorn turbo manifold, T4 Flanged and flanged for a HKS GTII 60mm wastegate – may work with the new Tial 60mm wastegate as well but not sure as I haven’t checked yet – Great condition – just beadblasted – we have run this manifold for (3) seasons with not one issue at all -- $650
--- will consider selling the HKS GTII wastegate with the manifold for an additional $600



(1) Golden Eagle Black Fuel Rail, used for the last 3 seasons – great condition – setup to accept the bosch style injectors -- SOLD

(1) Aeromotive Universal FPR, Part # 13101, -10AN Size with FPR Gauge -- SOLD


(1) Used Golden Eagle Intake Manifold with custom inlet extension and Q45 (90mm) throttle body installed on it. Will only sell the manifold and throttle body as a combo deal since the extension was specifically made for the Q45 throttle body and it is installed onto it. Great condition – works very well, helped us make 750+ whp -- SOLD



Innes Performance Group, LLC
Contact – James Innes
Phone – 407-324-4684
Racing@IPGParts.com

Payment will be accepted at Paypal at Info@JamesInnesRacing.com, a credit card over the phone at 407-324-4684 or a money order.

Pics are available upon request -- Please email me for them at Racing@IPGParts.com and don't waste my time please -- be serious if you are looking for pictures


Modified by Innes at 3:44 PM 8/14/2007


Modified by Innes at 4:38 PM 8/17/2007

 

 

 

updated with some sold parts

 

ttt

 

 

ttt

 

ttt