Please don't post if you are only going to be negative
OK, I have searched and all of the locations in the previous post are either out of buisness or on backorder.
I swear to Christ I will pistol whip the next person who tells me to search....

I have been searching for the past 4 months off and on and it seems as though every route I try to take leads to a dead end. I am almost done with my motor and I'm not about to do the breakin on a stock EF9 exhaust.
If anyone can point me into the right direction of a person or company that either stocks one or can get one, I would be very thankful.

 

The best I have found so far is $510 shipped but it's the kinda place that would greatly accept my money and wait a few months before informing me that they can't get it.

 

you can either order from RS*R directly:

http://www.rs-r.com/store/pc/home.asp

OR

buy from a sponsored vendor.

I placed an order at radiummotorsports.com for my exmag and I recieved no confirmation at all. I called several times and no answer on the phone. The whole order was just sketchy so I decided to cancel payment and go through RS*R.

For $510 you might have been looking at the 1st gen Exmag exhaust. The 2nd gen has an "S" on the end of the model numbers to represent that the exhaust is stainless steel (doesn't rust as easily). First gen I think was just powder coated.

I saw a cat-back system for $492 but it was first gen. I talked to an RS*R representative who said that no vendor can sell below the MSRP which is $549. When I did some searching, I did'nt find any price lower, some higher, but most the same price. Shipping costs varied however.

Just make sure you get a tracking number, and order confirmation. Hope this helped.

 

last time i saw one available was over at robearracing.com
http://robearracing.com/pd_rsr_exmag_exh_crx.cfm

great company to work with, very helpful with their customer service.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91.crx.si &raquo;</TD></TR><TR><TD CLASS="quote">you can either order from RS*R directly:

http://www.rs-r.com/store/pc/home.asp

OR

buy from a sponsored vendor.

I placed an order at radiummotorsports.com for my exmag and I recieved no confirmation at all. I called several times and no answer on the phone. The whole order was just sketchy so I decided to cancel payment and go through RS*R.

For $510 you might have been looking at the 1st gen Exmag exhaust. The 2nd gen has an "S" on the end of the model numbers to represent that the exhaust is stainless steel (doesn't rust as easily). First gen I think was just powder coated.

I saw a cat-back system for $492 but it was first gen. I talked to an RS*R representative who said that no vendor can sell below the MSRP which is $549. When I did some searching, I did'nt find any price lower, some higher, but most the same price. Shipping costs varied however.

Just make sure you get a tracking number, and order confirmation. Hope this helped.</TD></TR></TABLE>

Yeah it turns out that the company with one for $510 didn't even sell them anymore...Thanks for all the info

 

You could always SEARCH some more......lol......had to do it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboyef9 &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah it turns out that the company with one for $510 didn't even sell them anymore...Thanks for all the info </TD></TR></TABLE>

My buddy wanted the exact same exhaust for his HB last year and I know for a fact my vendor is not out of buisness and as long as the RS-R is available they can get it (unless something changed that I don't know about). The one thing to keep in mind is nobody stocks this exhaust due to how rare it sells, it's always special order. with that said if you really want it, it will most likely take some patience (usually 6-8 weeks depending on availibilty and the acceptance that your gonna have to pay full price for it, nice parts are always worth spending a little more on and waiting for.

I am very busy through the week and don't know how soon I can call but I'll try to find out availabilty for you soon if you really are serious about this, I used to run a custom shop a few years ago so I know the ins and outs of the business.

 

Exhaust found

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboyef9 &raquo;</TD></TR><TR><TD CLASS="quote">Exhaust found </TD></TR></TABLE>

Congrats, you will be very happy with it.

 

lol i like how he searched !

 

awesome man! post up a clip when you get it installed

 

does anybody have a video clip of the exaust note?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboyef9 &raquo;</TD></TR><TR><TD CLASS="quote">Exhaust found </TD></TR></TABLE>
congrats ....lmk what you want for your ef9 axle-back.

 

It will be a few weeks before I can even get it so I will let you know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboyef9 &raquo;</TD></TR><TR><TD CLASS="quote">It will be a few weeks before I can even get it so I will let you know </TD></TR></TABLE>
thats cool who did you end up getting it from?

 

I will let you know after my birthday where I'm getting it....Don't worry, I'm buying it