Out of the game sale--ALL MUST GO B16/civic/turbo/shell
Thread Starter
Junior Member
Joined: May 2004
Posts: 888
Likes: 0
From: In Your Bizzal, OH, USA
Out of the game sale--ALL MUST GO B16/civic/turbo/shell
Ok, the Final “Get out of the Game Sale!!!”
I am selling everything out of my garage Car/Honda related
I need this gone by the end of the month. IF you don’t like the price, make an offer. I am located in Ashtabula, but will be willing to drive somewhat to meet the buyer. All Prices are O.B.O and shipping is NOT Included. Most of the Turbo related stuff has less then 100 miles on it. I started a project, and no longer have the time nor motivation to finish.
Paypal add 3%
First off I will start with my car.
The car is a 93 Civic EX
The body has 66k original Miles and just had a fresh pain job($2500)
The color is stock Nissan Metellic Grey
Wings west RS kit (front and rear lip molded)
Factory fogs
Carbon fiber hood and fenders (paint faded on fenders to match a little better.)
Interior is not complete. Selling my sparco’s, so seats will be needed. Door panels will need to be finished, minor wiring will need to be finished. Nothing major.
Engine in it…(might sell it as a shell)
99Si B16a2 (47K on it)
GSR Cams
AEM Cam Gears
STR Cam Seal
AEM Cam Gears
Toda Timing Belt
RC 240 injectors
AEM FPR
Skunk2 Intake Mani
Type R Valve Cover
No Headers as of yet.. but neuspeed available
SPOON LSD Tranny (Nice LSD!!)
Clutchmasters Stage 3 clutch and lightened flywheel
HASport Motor mounts
No Exhaust
Suspension
Ground Control Coil Overs
KYB GR2 Struts (under 200 miles on them)
Skunk 2 front camber kit
Ingals Rear (not installed)
Parts for sale!!!!!!!!!!!!!!!!!!! (I am sure I forgot something, so I will add more later)
Nology Blue Spark Plug wires (LIKE NEW!!) - $65
RLD Fab Ram Horn Turbo Manifold Setup(less then 100 miles on it) - $800
Manifold, 3” DP heatwrapped, Dump Tube
Spearco Intercooler and intercooler piping for 92-95 civic to KEEP factory Fogs.
This piping was tig welded, 2” on Hot side, 2.25 cold side. GREAT SETUP!
$250
Gloss Black powder coated Charge pipe - $75
Sparco Monza’s (99.9% NEW!!!) Black with Red center - $900 for Pair!!!
I have sliders and brackets also for 92-95 civics/94-01 integras…
b16 Jackson Super Charger (used for 3 summers, about 4 months a summer)
FUEL RAIL AND INJECTORS NOT INCLUDED
Comes with everything, including all three pulleys! - $1300
RC 550’s Peak and Hold – about 4k on them - $200
Tapped B16 Oil pan - $40
Autometer Carbon Fiber Guages (boost, oil pres, water) (99.9% new) - $100
Thermal 3” Exhaust(less then 100 miles on it) 99.9% NEW!! - $450
92-95 Civic 2door Factory Window Switches(I have 2 one in black and one in grey - $10 each
D16z6 Intake manifold(great shape)66k on it - $40
Apexi AVC-R - $250
Apexi Turbo Timer - $40
Hondata s200 w/boost and P28 - $350
Several Stock rear motor mounts (not sure what for) -$5.00
Stock Interga Sway bar (no end links) - $10.00
92-95 civic cruise control System - $20
1 Stock b16 Intake Manifolds - $10 Each
JT500 2 way pager alarm - $200 (99.9% new)
PPI ProMos 450 (OLD SCHOOL AMP) - $200
Coustic XM3e Crossover - $50
99Si Stock Springs(under 50 miles on them) - $10
Clarion In Dash DVD/touch screen head unit (No brain) Will need brain to work, which are all over ebay at times. - $200[/B]
Modified by OshkyCiv23 at 2:27 AM 8/4/2007
Modified by OshkyCiv23 at 1:10 AM 8/12/2007
Modified by OshkyCiv23 at 8:24 PM 8/16/2007
I am selling everything out of my garage Car/Honda related
I need this gone by the end of the month. IF you don’t like the price, make an offer. I am located in Ashtabula, but will be willing to drive somewhat to meet the buyer. All Prices are O.B.O and shipping is NOT Included. Most of the Turbo related stuff has less then 100 miles on it. I started a project, and no longer have the time nor motivation to finish.
Paypal add 3%
First off I will start with my car.
The car is a 93 Civic EX
The body has 66k original Miles and just had a fresh pain job($2500)
The color is stock Nissan Metellic Grey
Wings west RS kit (front and rear lip molded)
Factory fogs
Carbon fiber hood and fenders (paint faded on fenders to match a little better.)
Interior is not complete. Selling my sparco’s, so seats will be needed. Door panels will need to be finished, minor wiring will need to be finished. Nothing major.
Engine in it…(might sell it as a shell)
99Si B16a2 (47K on it)
GSR Cams
AEM Cam Gears
STR Cam Seal
AEM Cam Gears
Toda Timing Belt
RC 240 injectors
AEM FPR
Skunk2 Intake Mani
Type R Valve Cover
No Headers as of yet.. but neuspeed available
SPOON LSD Tranny (Nice LSD!!)
Clutchmasters Stage 3 clutch and lightened flywheel
HASport Motor mounts
No Exhaust
Suspension
Ground Control Coil Overs
KYB GR2 Struts (under 200 miles on them)
Skunk 2 front camber kit
Ingals Rear (not installed)
Parts for sale!!!!!!!!!!!!!!!!!!! (I am sure I forgot something, so I will add more later)
Nology Blue Spark Plug wires (LIKE NEW!!) - $65
RLD Fab Ram Horn Turbo Manifold Setup(less then 100 miles on it) - $800
Manifold, 3” DP heatwrapped, Dump Tube
Spearco Intercooler and intercooler piping for 92-95 civic to KEEP factory Fogs.
This piping was tig welded, 2” on Hot side, 2.25 cold side. GREAT SETUP!
$250
Gloss Black powder coated Charge pipe - $75
Sparco Monza’s (99.9% NEW!!!) Black with Red center - $900 for Pair!!!
I have sliders and brackets also for 92-95 civics/94-01 integras…
b16 Jackson Super Charger (used for 3 summers, about 4 months a summer)
FUEL RAIL AND INJECTORS NOT INCLUDED
Comes with everything, including all three pulleys! - $1300
RC 550’s Peak and Hold – about 4k on them - $200
Tapped B16 Oil pan - $40
Autometer Carbon Fiber Guages (boost, oil pres, water) (99.9% new) - $100
Thermal 3” Exhaust(less then 100 miles on it) 99.9% NEW!! - $450
92-95 Civic 2door Factory Window Switches(I have 2 one in black and one in grey - $10 each
D16z6 Intake manifold(great shape)66k on it - $40
Apexi AVC-R - $250
Apexi Turbo Timer - $40
Hondata s200 w/boost and P28 - $350
Several Stock rear motor mounts (not sure what for) -$5.00
Stock Interga Sway bar (no end links) - $10.00
92-95 civic cruise control System - $20
1 Stock b16 Intake Manifolds - $10 Each
JT500 2 way pager alarm - $200 (99.9% new)
PPI ProMos 450 (OLD SCHOOL AMP) - $200
Coustic XM3e Crossover - $50
99Si Stock Springs(under 50 miles on them) - $10
Clarion In Dash DVD/touch screen head unit (No brain) Will need brain to work, which are all over ebay at times. - $200[/B]
Modified by OshkyCiv23 at 2:27 AM 8/4/2007
Modified by OshkyCiv23 at 1:10 AM 8/12/2007
Modified by OshkyCiv23 at 8:24 PM 8/16/2007
Honda-Tech Member
Joined: Jul 2002
Posts: 2,250
Likes: 1
From: MI
Re: (DAfireman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DAfireman »</TD></TR><TR><TD CLASS="quote">you think the supercharger will fit in my DA engine bay??????</TD></TR></TABLE>
I had the same supercharger in my B16 EF. I'd say it would fit fine.
I had the same supercharger in my B16 EF. I'd say it would fit fine.
Trending Topics
Thread Starter
Junior Member
Joined: May 2004
Posts: 888
Likes: 0
From: In Your Bizzal, OH, USA
Re: (WAT THA!!!)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WAT THA!!! »</TD></TR><TR><TD CLASS="quote">pmed</TD></TR></TABLE>
back at ya
back at ya
Thread Starter
Junior Member
Joined: May 2004
Posts: 888
Likes: 0
From: In Your Bizzal, OH, USA
Re: (OshkyCiv23)
Air Fuel Guage -- SOLD
MFactory Adapter -- SOLD
Amber Corners Sold
2.5 Exhaust -- SOLD
Starter --- SOLD
Fuel Rail -- SOLD
Strut Bar -- SOLD
1 Stock intake mani -- SOLD
Alternator - SOLD
Shift Light - SOLD
B16 Cams - SOLD
Cluster Trim - SOLD
CF Oil and Boost gauges -- pending
Modified by OshkyCiv23 at 12:44 AM 8/5/2007
Modified by OshkyCiv23 at 2:23 AM 8/6/2007
MFactory Adapter -- SOLD
Amber Corners Sold
2.5 Exhaust -- SOLD
Starter --- SOLD
Fuel Rail -- SOLD
Strut Bar -- SOLD
1 Stock intake mani -- SOLD
Alternator - SOLD
Shift Light - SOLD
B16 Cams - SOLD
Cluster Trim - SOLD
CF Oil and Boost gauges -- pending
Modified by OshkyCiv23 at 12:44 AM 8/5/2007
Modified by OshkyCiv23 at 2:23 AM 8/6/2007
Honda-Tech Member
Joined: Jul 2007
Posts: 48
Likes: 0
From: mayfield hts, ohio, united states
Re: Out of the game sale--ALL MUST GO B16/civic/turbo/shell (OshkyCiv23)
Hey just wondering if you are selling the shell and for how much you want im semi near you in cleveland ohio so I can come pick it up any weekend this month. let me know thanks
Thread Starter
Junior Member
Joined: May 2004
Posts: 888
Likes: 0
From: In Your Bizzal, OH, USA
Re: Out of the game sale--ALL MUST GO B16/civic/turbo/shell (ejcivicex)
I plan on it.. but haven't thought of a price. You are very close. Give me a call...I'll pm you my nunber..
