I recently changed my clutch and when I put it all back together the ****** wont start now. Please if any on can help or just give an idea Im lost.

 

grounds?

 

does it turn over and just won't start, or does the starter not even have power? be more specific

 

Yes the starter works fine it is geting power but the motor wont crank over at all. All I here is the starter turning nothing else.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Emg &raquo;</TD></TR><TR><TD CLASS="quote">Yes the starter works fine it is geting power but the motor wont crank over at all. All I here is the starter turning nothing else.</TD></TR></TABLE>

spinning freely? If so, you need to adjust the starter so that it comes in contact with the flywheel.

 

How do I adjust the starter Ive never heard of that before.

 

once you have it bolted on, rotate it counterclockwise until it stops. I had that problem before and this is what fixed it.

 

Did you attach the ground at the thermostat housing?

 

Yep and the one on the tranny to also the motor has 189000 miles and I did a flush. Could this have locked it up? Im going to try to push start it tommorow but thanks for all the help kip it coming.