RC Injectors, Garrett 60-1, Momo, SX fpr, GSR Black Leather, NA/Boost parts.. 619 San Diego
Thread Starter
B*a*n*n*e*d
Joined: Oct 2006
Posts: 2,887
Likes: 0
RC Injectors, Garrett 60-1, Momo, SX fpr, GSR Black Leather, NA/Boost parts.. 619 San Diego
vouches can be found in my sig but im relatively new to selling on honda-tech but i know a lot about buying and selling etiquette. most of it comes from the saying "treat others as you want to be treated"- i wouldnt want you to sell me something that was bad/broken/incorrect part/whatever without me knowing first. ive also sold on ebay for the past couple years as well. i describe the item as best i can and let you know as much as i know about it, any questions or comments are welcomed.
most of these parts have been sitting around for a couple monthes being stored in my closet, my garage or under my patio in the backyard. i can ship these anywhere in the world as long as you pay for shipping or we work out an agreement first- i can ship these usps, ups, fedex or dhl, whatever you prefer and whatever you want to pay for. lowball me on anything as the worst i can say is no. everything is located in san diego, ca near mission valley area. if you pm me on here, please do a post saying so i know to check my pms cuz i dont always check it or email me: hazel_144@yahoo.com
open to trades as well, dont be afraid to offer me whatever or lowball me cuz im always looking
EDIT i recently purchased an EG with a gsr swap so i'll need the essentials- intake(AEM v2, whale *****, short ram..), headers(smsp, dtr, hytech, an-r, lovefab, profab, etc), intake manifold(skunk2, blox, aebs, etc. for gsr head), strut bars, and exhaust(2.25"-2.5" greddy, apexi, skunk2, etc).
LOOKING FOR: skunk2/omni/portflow/buddy club/supertech/ferrea valvetrain (valves, springs, retainers) as well as skunk2/buddy club/blox cams and also cp/wiseco/arias 11.5:1 and eagle 3/8 bolt rods so i'm open to trades and lowballs, items can be shipped or picked up locally.[/b]
onto the goods:
RC Racing 370cc injectors
these injectors were used for about 3,000 miles on my all motor before i threw on my turbo and went to 440cc injectors and theyve just been sitting ever since. the 370's have seen very light use. no clips come with these injectors so you will need to pick some up, you can usually find them pretty cheap tho. these are obd1 injectors i believe. i might have an oem gasket/ring set for these lying around that i can include for a little bit more. ill look once i get someone seriously interested. looking for DECIDED TO USE THESE
================================================== ===========
Brand New Garrett 60-1 T3 flanged Turbo
I bought this turbo brand new about 6 monthes ago through an authorized local Garrett dealer for my boost project. My car getting stolen forced me to trade by built longblock for a new car so I have no use for this turbo now. it has a .70 coldside and a .82 exhaust side with a stage 5 wheel. I believe its a .70 trim but I cant remember for sure. Its one of very few 60-1 turbos you will find with a T3 exhaust housing and should see full boost between 4300-5200rpms depending on your set up. This turbo is good up to 560-580whp and is very versatile. I paid $825 shipped for this including tax so im hoping to get some of my money back or workout some kind of trade for all motor gsr parts. This is not a cheap knockoff or ebay crap, this is genuine brand new Garrett, I blurred the serial number on photoshop but it is still there and intact for any warranty work. Comes with Oil feed and Oil drain flanges made of CNC'd aluminum from Datum1. Any questions, please ask..COMBO DEAL SOLD
if anyone is interested, i will do a combo deal with the 60-1, tial 44mm wastegate, spearco 33x10.5x3.5" intercooler (2-216 core), and hks ssq bov with flange for $1350 shipped, pics if interested of other items- may list items seperately later
================================================== ===========
Momo 92-95 Civic/94-01 Integra 6 bolt steering Hub
Used for about 6 monthes before I went to a Works Bell setup. Was installed and removed professionally and functions flawlessly. Comes with a brand new metal gasket/bolts for steering wheel. Should fit all Momo, NRG, etc steering wheels with the 6 Bolt pattern. SOLD TO BOBALICIOUS
================================================== ===========
SX (Essex) Performance Fuel Pressure Regulator
Brand new in the box, purchased 6 monthes or so ago for my turbo project but now must be parted with. This is one is equivalent or better than the aeromotive FPR and comes with all mounting hardware as well as the AN- fitting for the drain. Will also include teflon tape as well as installation instructions. SOLD TO VW EATER
================================================== ===========
Viper XV791 Alarm Remote LCD
Was a spare for my alarm and I no longer have any use for this. Has the LCD with car diagram that shows when your door is open or what part of the car is being tampered with. Has the buttons for car to do: remote start, turbo timer, automatic window roll up, power folding mirrors, etc. costs over $150 brand new from DEI $50 OBO
================================================== ===========
2.5" Dumptube Exhaust piping with dual Magnaflow resonators
my friend had this custom made and was sporting it on his 95 all motor b20/vtec before he went to boost.
this was on a 95 integra so i would assume it will fit on all 94-01 integras and probably 92-95 civics as well but buyer is responsible for fitment. slight rust from sitting but should function flawlessly. one resonator is 22" and the other resonator is 18" and the total length of the exhaust is 68". also, there is no flange to bolt the exhaust to your cat or b pipe so you can either weld it directly or put a flange on there, its up to you. probably want to do local pickup on this as im not sure how much shipping will be, but buyer will be very happy with hp increase while still retaining relatively low noise. $120 or make me an offer
================================================== ===========
B16 1.6L crank
used crank out of a b16 motor. i believe it came out of a b16a2 with about 43k because he wanted to use a gsr crank instead. crank looks to be in pretty condition although its been sitting under my patio in a box for about 6 monthes. if you want, i can get a quote for knife edging the crank and/or micropolishing as well- i can get both done pretty cheap by a reputable local motor builder. $100 or make offer
================================================== ===========
2001 Integra Type-R 5 lug OEM rotors
these rotors were on a 2001 acura integra type-r, they are the 5 lug front rotors and have very light use on them. these were never abused or anything, the car was kept meticulously and the brakes were no exeption. there is absolutely no warpage or blemishes on these, they were only removed to go to brembos and ss lines. i can include f+r pads as well for a small fee. Offer me
================================================== ===========
2001 Integra GSR black leather rear seats
these rear seats came out of my 2001 GSR when i was going down to the track and basically never went back in. theyve been sitting for a little over a month in my living room behind the couch and havent really had too many asses sitting in them before because my car was no taxi. there are only 3 small things that i would consider physical damage/blemishes to the seats. one is a small tear on the driver side rear back part, its about 3 inches long and is a very small tear that can be fixed easily (pic #2). the next small damage (not even anything really) are some small cuts in the plastic holder between the seats. theres only a couple of them and they are VERY small/hardly noticeable but i am very **** about my car (pic #3). and the final blemish cant even be seen without the trunk open, its a very light rip in the back of the seat about the size of a penny (should be easy to fix as well). this was on the car when i bought it but i didnt worry about it too much since it cant be seen from the cab (pic #4). spots on the seats in the pics are from a light rubdown before the pics, they could use a nice armoral cleaning as theyve been sitting for a little bit, i would rate them between an 8.5-9.3/10. Offer me
================================================== ===========
94-01 Integra GSR strut bar
Came off my 2001 Integra GSR with very light use. No dings or major chips on this baby. SOLD to |2yan
================================================== ===========
2001 Yamaha R6 Blue gas tank
Came off my friends 01' R6 in place of a full carbon fiber gas tank, was going to use this for a project but project was scrapped to focus on other things at the moment. Has a light scrape on the left side of the tank as seen in the pictures, other than that there are no other major dents or scrapes. Tank is bare pretty much, should fit 00'-03' r6 i believe, may fit other years but thats on you. Make offer
================================================== ===========
2001 Integra GSR stock Rear LCA's
Removed because I did a Type-R rear LCA conversion to use JDM Type-R function form suspension. Had maybe 70,000 miles on it and worked fine when it was removed. Yada yada yada $40 OBO
Modified by zeimbo at 10:59 PM 9/30/2007
most of these parts have been sitting around for a couple monthes being stored in my closet, my garage or under my patio in the backyard. i can ship these anywhere in the world as long as you pay for shipping or we work out an agreement first- i can ship these usps, ups, fedex or dhl, whatever you prefer and whatever you want to pay for. lowball me on anything as the worst i can say is no. everything is located in san diego, ca near mission valley area. if you pm me on here, please do a post saying so i know to check my pms cuz i dont always check it or email me: hazel_144@yahoo.com
open to trades as well, dont be afraid to offer me whatever or lowball me cuz im always looking
EDIT i recently purchased an EG with a gsr swap so i'll need the essentials- intake(AEM v2, whale *****, short ram..), headers(smsp, dtr, hytech, an-r, lovefab, profab, etc), intake manifold(skunk2, blox, aebs, etc. for gsr head), strut bars, and exhaust(2.25"-2.5" greddy, apexi, skunk2, etc).
LOOKING FOR: skunk2/omni/portflow/buddy club/supertech/ferrea valvetrain (valves, springs, retainers) as well as skunk2/buddy club/blox cams and also cp/wiseco/arias 11.5:1 and eagle 3/8 bolt rods so i'm open to trades and lowballs, items can be shipped or picked up locally.[/b]
onto the goods:
RC Racing 370cc injectors
these injectors were used for about 3,000 miles on my all motor before i threw on my turbo and went to 440cc injectors and theyve just been sitting ever since. the 370's have seen very light use. no clips come with these injectors so you will need to pick some up, you can usually find them pretty cheap tho. these are obd1 injectors i believe. i might have an oem gasket/ring set for these lying around that i can include for a little bit more. ill look once i get someone seriously interested. looking for DECIDED TO USE THESE
================================================== ===========
Brand New Garrett 60-1 T3 flanged Turbo
I bought this turbo brand new about 6 monthes ago through an authorized local Garrett dealer for my boost project. My car getting stolen forced me to trade by built longblock for a new car so I have no use for this turbo now. it has a .70 coldside and a .82 exhaust side with a stage 5 wheel. I believe its a .70 trim but I cant remember for sure. Its one of very few 60-1 turbos you will find with a T3 exhaust housing and should see full boost between 4300-5200rpms depending on your set up. This turbo is good up to 560-580whp and is very versatile. I paid $825 shipped for this including tax so im hoping to get some of my money back or workout some kind of trade for all motor gsr parts. This is not a cheap knockoff or ebay crap, this is genuine brand new Garrett, I blurred the serial number on photoshop but it is still there and intact for any warranty work. Comes with Oil feed and Oil drain flanges made of CNC'd aluminum from Datum1. Any questions, please ask..COMBO DEAL SOLD
if anyone is interested, i will do a combo deal with the 60-1, tial 44mm wastegate, spearco 33x10.5x3.5" intercooler (2-216 core), and hks ssq bov with flange for $1350 shipped, pics if interested of other items- may list items seperately later
================================================== ===========
Momo 92-95 Civic/94-01 Integra 6 bolt steering Hub
Used for about 6 monthes before I went to a Works Bell setup. Was installed and removed professionally and functions flawlessly. Comes with a brand new metal gasket/bolts for steering wheel. Should fit all Momo, NRG, etc steering wheels with the 6 Bolt pattern. SOLD TO BOBALICIOUS
================================================== ===========
SX (Essex) Performance Fuel Pressure Regulator
Brand new in the box, purchased 6 monthes or so ago for my turbo project but now must be parted with. This is one is equivalent or better than the aeromotive FPR and comes with all mounting hardware as well as the AN- fitting for the drain. Will also include teflon tape as well as installation instructions. SOLD TO VW EATER
================================================== ===========
Viper XV791 Alarm Remote LCD
Was a spare for my alarm and I no longer have any use for this. Has the LCD with car diagram that shows when your door is open or what part of the car is being tampered with. Has the buttons for car to do: remote start, turbo timer, automatic window roll up, power folding mirrors, etc. costs over $150 brand new from DEI $50 OBO
================================================== ===========
2.5" Dumptube Exhaust piping with dual Magnaflow resonators
my friend had this custom made and was sporting it on his 95 all motor b20/vtec before he went to boost.
this was on a 95 integra so i would assume it will fit on all 94-01 integras and probably 92-95 civics as well but buyer is responsible for fitment. slight rust from sitting but should function flawlessly. one resonator is 22" and the other resonator is 18" and the total length of the exhaust is 68". also, there is no flange to bolt the exhaust to your cat or b pipe so you can either weld it directly or put a flange on there, its up to you. probably want to do local pickup on this as im not sure how much shipping will be, but buyer will be very happy with hp increase while still retaining relatively low noise. $120 or make me an offer
================================================== ===========
B16 1.6L crank
used crank out of a b16 motor. i believe it came out of a b16a2 with about 43k because he wanted to use a gsr crank instead. crank looks to be in pretty condition although its been sitting under my patio in a box for about 6 monthes. if you want, i can get a quote for knife edging the crank and/or micropolishing as well- i can get both done pretty cheap by a reputable local motor builder. $100 or make offer
================================================== ===========
2001 Integra Type-R 5 lug OEM rotors
these rotors were on a 2001 acura integra type-r, they are the 5 lug front rotors and have very light use on them. these were never abused or anything, the car was kept meticulously and the brakes were no exeption. there is absolutely no warpage or blemishes on these, they were only removed to go to brembos and ss lines. i can include f+r pads as well for a small fee. Offer me
================================================== ===========
2001 Integra GSR black leather rear seats
these rear seats came out of my 2001 GSR when i was going down to the track and basically never went back in. theyve been sitting for a little over a month in my living room behind the couch and havent really had too many asses sitting in them before because my car was no taxi. there are only 3 small things that i would consider physical damage/blemishes to the seats. one is a small tear on the driver side rear back part, its about 3 inches long and is a very small tear that can be fixed easily (pic #2). the next small damage (not even anything really) are some small cuts in the plastic holder between the seats. theres only a couple of them and they are VERY small/hardly noticeable but i am very **** about my car (pic #3). and the final blemish cant even be seen without the trunk open, its a very light rip in the back of the seat about the size of a penny (should be easy to fix as well). this was on the car when i bought it but i didnt worry about it too much since it cant be seen from the cab (pic #4). spots on the seats in the pics are from a light rubdown before the pics, they could use a nice armoral cleaning as theyve been sitting for a little bit, i would rate them between an 8.5-9.3/10. Offer me
================================================== ===========
94-01 Integra GSR strut bar
Came off my 2001 Integra GSR with very light use. No dings or major chips on this baby. SOLD to |2yan
================================================== ===========
2001 Yamaha R6 Blue gas tank
Came off my friends 01' R6 in place of a full carbon fiber gas tank, was going to use this for a project but project was scrapped to focus on other things at the moment. Has a light scrape on the left side of the tank as seen in the pictures, other than that there are no other major dents or scrapes. Tank is bare pretty much, should fit 00'-03' r6 i believe, may fit other years but thats on you. Make offer
================================================== ===========
2001 Integra GSR stock Rear LCA's
Removed because I did a Type-R rear LCA conversion to use JDM Type-R function form suspension. Had maybe 70,000 miles on it and worked fine when it was removed. Yada yada yada $40 OBO
Modified by zeimbo at 10:59 PM 9/30/2007
Honda-Tech Member
Joined: Feb 2006
Posts: 2,370
Likes: 0
From: Speeding through, California, United States
Re: RC Injectors, Garrett 60-1, Momo, SX fpr, GSR Black Leather, NA/Boost parts.. 619 San Diego (zei
good ****. what comp were you running with those injectors? any problems?
Thread Starter
B*a*n*n*e*d
Joined: Oct 2006
Posts: 2,887
Likes: 0
Re: RC Injectors, Garrett 60-1, Momo, SX fpr, GSR Black Leather, NA/Boost parts.. 619 San Diego (zei
only 11.2:1 with all supporting mods. made about 194whp, unfortunately i only had a vafc1 at the time to tune with 
and a chipped p28. no problems with them at all, theyre rc man- solid as a rock.
and a chipped p28. no problems with them at all, theyre rc man- solid as a rock.
