skunk 2 pro series cams

Reply Subscribe

Thread Tools

Search this Thread

Jul 13, 2007 | 06:56 AM

wens_crx

Thread Starter

Joined: May 2007

Posts: 24

Likes: 0

From: Shafter, Ca, US

skunk 2 pro series cams

i was wondering if the skunk 2 pro series cams could be used with my stock b16a2 cam gears

Jul 13, 2007 | 07:01 AM

SkoundrelUSA

cute little bastard

Joined: Aug 2004

Posts: 7,086

Likes: 0

From: Sersey Jhore

Re: skunk 2 pro series cams (wens_crx)

technically. no. Yes the gears will fit onto the camshafts, but these cams need to be degree'd in order to run correctly/idle. Mine took forever to degree to get my car engine to idle (Pro 1s)

Jul 13, 2007 | 08:21 PM

wens_crx

Thread Starter

Joined: May 2007

Posts: 24

Likes: 0

From: Shafter, Ca, US

Re: skunk 2 pro series cams (SkoundrelUSA)

thanks so that means im gonna order them right now

Jul 13, 2007 | 08:58 PM

thegreat0ne

Honda-Tech Member

Joined: Mar 2006

Posts: 984

Likes: 0

From: westminster, ca, usa

Re: skunk 2 pro series cams (wens_crx)

are the pro stage one cams equal to or stronger then the street stage three camshafts? If not, which are they equal to?

Jul 15, 2007 | 10:19 AM

thegreat0ne

Honda-Tech Member

Joined: Mar 2006

Posts: 984

Likes: 0

From: westminster, ca, usa

Re: skunk 2 pro series cams (thegreat0ne)

bump

Jul 15, 2007 | 02:27 PM

h22a1_julien

Honda-Tech Member

Joined: Jul 2007

Posts: 185

Likes: 0

From: Shediac, NB, Canada

Re: skunk 2 pro series cams (thegreat0ne)

stage 1 or three deosnt matter.....b16's head is mostly already done stock..
but with stock valvetrain/retaners will most likely take a beating if not done correctly...degree'd like he said