I just recently acquired a JDM front end for my 95DC2 (non-ITR black housing). I will be installing it next week...
Shout out & big thanks to b0mb3rm2n BTW

These are the items I have been collecting in addition to the complete front end ($1350) I already have:

(Below are the parts I got at my local Acura)
(1) 74130-SK7-A01ZA - WIRE ASSY., Integra hood cable DA 90-93 $48.87
(2) 71598-SL4-013 - Spacer (Plastic Guide for Bumper) $10.82
(2) 91635-SM4-003 - Grommet (Fits in the insides of the headlights to secure the Front Grille) $1.40
(2) 90109-SS0-000 - Screw (for Above) $10.12
(3) 91503-SP0-003 - Bumper Clip (Secure Bumper to its Support) $17.73
Total (w/tax): $95.83 I will most likely return them once I get my order from acuraautomotiveparts.org $60+ priced out-- Much cheaper there!!!

Also got:
Half-length Mishimoto Civic/Del Sol radiator from hybridperformance.com $159 shipped
Self-tapping screws, other misc bolts, coolant - $40

I know for a fact that I will need to reuse the following bolts off my car:
Healight bolts, fender bolts, bumper reinforcement bolts. Please let me know if I am missing anything?

As far as the headlight wiring, I have that covered already.


From the picture above, I am missing the original:
#9, #31 all the bolts (I'm using bolts from a hardware store currently) -- Will I be needing those for the JDM piece?


Labor is free. All together it will cost $1600+ (including new radiator) for all the parts necessary and maybe more. I will also be repainting my car black again... (maybe another $1200 quoted)

I appreciate any input.
Also, once I get my new front end on, I will be selling my 98+ Integra front end (hood, headlights, fenders, bumper, etc so if you're interested let me know).

- NightRider-gsR

 

Anyone have a clue?

 

You don't need #9 or #31.

Edit:

Btw why did you buy a new radiator?