Hey guys, im putting out a feeler thread. I have a built shortblock that im probably going to part out soon. it has a dyno session and aproximately 4 or 5 passes on it. turned out the rings were gapped too large, so i pulled the engine and havent touched it in a while. Here is a list of parts from the motor.

B18b bare block - 84mm Golden Eagle HD Sleeves, maincaps have been machined to fit gsr main girdle which is also included. The caps do need modification, as they were not reemed for dowel pins yet. Gsr oil pan, pickup and windage tray will also be included. also stock oil cooler from a gsr was installed on the block. I'll leave the acl bearings in also. I'll even throw in the vtec GSR/ITR oil pump

Asking $900/bo

Eagle h beam LS rods w arp bolts, i'll probably throw in the acl bearings for this one too

$200

JE 9.0:1 84mm Pistons w wristpins (no rings)
Sold

Vtec oil pump
$100


ARP LS/Vtec Headstuds
$100

If you want pic's let me know. I'll probably have them after the holiday when i have time to disassemble. Engine is still assembled at the moment. Stuff is located at my friends shop in SSF,ca. If there are any questions feel free to email

Email goneraven@aol.com

Thanks


Modified by Huee at 11:20 AM 7/7/2007


Modified by Huee at 6:17 PM 7/18/2007

 

Bump

Pistons Sold

 

stuff still forsale?