how could i make intecooler piping 4 my crx (D series)
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 2,795
Likes: 0
From: THE UNION
how could i make intecooler piping 4 my crx (D series)
was up guys/ girls i need help making my piping for my crx but dont get a idea how to do it could u guys give me some pointers and pic to get some ideas thanks 
here are some pic of my project
here are some pic of my project
Honda-Tech Member
Joined: Jul 2004
Posts: 689
Likes: 0
From: Louisville, Ky, United States
Re: how could i make intecooler piping 4 my crx (Got_EF8)
just buy the ssautochrome front mount kit. There front mounts kits are actually nice.
http://app.infopia.com/Shop/Co...31982
http://app.infopia.com/Shop/Co...31982
Honda-Tech Member
Joined: Jan 2004
Posts: 11,129
Likes: 36
From: GO AUTOWORKS DOT COM
Trending Topics
Honda-Tech Member
Joined: Jan 2007
Posts: 783
Likes: 2
From: chattanooga, TN
Re: how could i make intecooler piping 4 my crx (Autoworks)
if you have a local hose place, that make trunk tank hose, i have a friend who ran his charge pipes out of it, it doesnt bend very aggresivly but it does work quiet well from what i have heard, look into that.
Honda-Tech Member
Joined: Mar 2006
Posts: 935
Likes: 0
From: Port Saint Lucie, FL, USA
I made mine out of pvc pipe. It sounds ghetto; but it only cost like $40 and the IAT temps are so cool you can grab the I/C piping after a 1/4 mile run. I've been using it for a year now and I have had no leaks or anythings.
I plan on eventually getting some mandrel bent pipt; but, want to finish some other stuff first.
I plan on eventually getting some mandrel bent pipt; but, want to finish some other stuff first.
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 2,795
Likes: 0
From: THE UNION
Re: (wfocrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wfocrx »</TD></TR><TR><TD CLASS="quote">I made mine out of pvc pipe. It sounds ghetto; but it only cost like $40 and the IAT temps are so cool you can grab the I/C piping after a 1/4 mile run. I've been using it for a year now and I have had no leaks or anythings.
I plan on eventually getting some mandrel bent pipt; but, want to finish some other stuff first.</TD></TR></TABLE>
lol thats tight
(DO U HAVE PICS)
I plan on eventually getting some mandrel bent pipt; but, want to finish some other stuff first.</TD></TR></TABLE>
lol thats tight
(DO U HAVE PICS)
Junior Member
Joined: Feb 2004
Posts: 544
Likes: 0
From: Fleet Street, Mo, United States
Re: (wfocrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_EF8 »</TD></TR><TR><TD CLASS="quote">
lol thats tight
(DO U HAVE PICS) </TD></TR></TABLE>
I want to see it also
lol thats tight
(DO U HAVE PICS) </TD></TR></TABLE>
I want to see it also
Honda-Tech Member
Joined: Jan 2004
Posts: 11,129
Likes: 36
From: GO AUTOWORKS DOT COM
Re: (Got_EF8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_EF8 »</TD></TR><TR><TD CLASS="quote">
lol thats tight
(DO U HAVE PICS) </TD></TR></TABLE>
x3
lol thats tight
(DO U HAVE PICS) </TD></TR></TABLE>x3
Re: (snowseeker)
it looks like there is one brace in the first pic. i don't know though. most people go the route of the CAI would go to the IC run the other side where the windshield washer went and back to the turbo.
Honda-Tech Member
Joined: Nov 2002
Posts: 17,227
Likes: 2
From: Illinois
Re: (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">it looks like there is one brace in the first pic. i don't know though. most people go the route of the CAI would go to the IC run the other side where the windshield washer went and back to the turbo.</TD></TR></TABLE>
The manifold has braces, but that does no good, the turbo actually has to have support holding it up.
The manifold has braces, but that does no good, the turbo actually has to have support holding it up.
Honda-Tech Member
Joined: May 2004
Posts: 2,844
Likes: 3
From: honky in, nc, usa
Re: how could i make intecooler piping 4 my crx (Got_EF8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_EF8 »</TD></TR><TR><TD CLASS="quote">was up guys/ girls i need help making my piping for my crx but dont get a idea how to do it could u guys give me some pointers and pic to get some ideas thanks
</TD></TR></TABLE>
CPE
https://honda-tech.com/zerothread?id=1771468
</TD></TR></TABLE>
CPE
https://honda-tech.com/zerothread?id=1771468
Thread
Thread Starter
Forum
Replies
Last Post
Got_EF8
Welding / Fabrication
17
Jul 4, 2007 10:33 PM
Got_EF8
Forced Induction
26
Jul 4, 2007 12:56 PM