EG suspension on EF
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 490
Likes: 0
From: cincinnati, oh
EG suspension on EF
OK, so I bought koni race shocks and lowering springs made for a EG.
I used the EG forks and everything bolted up great.
My car has like 3 inches of wheel gap with tenzo lowering springs, and the 36mm adjustable perch all the way down. I have tried some H&R springs and little results. I cut 2 coils off the rear H&R springs and made hardly a difference. I was wondering if possibly these shocks are too stiff for a EF and not letting my car go very low.
Does anyone have any ideas or suggestions on what I should do to lower my car??
I used the EG forks and everything bolted up great.
My car has like 3 inches of wheel gap with tenzo lowering springs, and the 36mm adjustable perch all the way down. I have tried some H&R springs and little results. I cut 2 coils off the rear H&R springs and made hardly a difference. I was wondering if possibly these shocks are too stiff for a EF and not letting my car go very low.
Does anyone have any ideas or suggestions on what I should do to lower my car??
Thread
Thread Starter
Forum
Replies
Last Post
exz0n-.-
Honda Civic / Del Sol (1992 - 2000)
11
Oct 28, 2008 12:30 PM
