Latest update

ALL HEADERS IN STOCK

Those of you who are interested, BUY ONE NOW WHILE THE PRICE IS THIS LOW. Price will increase due to low supply & high demand.


4-2-1 Production Tri-Y Stainless Steel Header (B Series)
Best Production Header On The Market Today!

This is THE MOST AFFORDABLE header on the market today that will outperforms ANY header in the same price range.

It will fit ALL B-Series Engines Honda Acura. All B18(A/B/C1/C5), B16, B20 Honda Engines.

It also clears radiator, works with P/S and A/C unlike some other designs.

NOTE: Does Not Fit 88-91 Civic chassis with factory crossmember, modifications will be required. Does not fit with factory Type R transmission / motor brace, transmission brace can be swapped with GSR/LS/B20. (modifications required by purchaser to fit properly)

Due to the long tube design for performance, this header will eliminate stock catalyst converter and meant for racing only. It may require an extension pipe in order to bolt into your factory or aftermarket exhaust system.

# 304 Stainless Steel (Brushed)
# Warranty against cracking
# High Flow Tri-Y Merge Collector
# Hand TIG weld
# CNC machined flange
# High Flow True 2.5" merge collector
# BRAND NEW IN RETAIL BOX
# Best Ground Clearance
# Long Tube Design

Guarantee fitment & quality ! Money back guarantee dyno proven!

This replica header is just like any other HyTech replica header out there on the market today that sells for $500+

PayPal ID: tdm8@sbcglobal.net

** FREE PRIORITY (2-3 DAY) SHIPPING.

For a limited time, we'll include:

* FREE OEM spec header gasket $30 value
* FREE OEM spec 2.5" donut gasket $20 value


*** HEADERS ARE NOT SHIPPING (Not in stock) UNTIL WEEK OF 4TH OF JULY. ESTIMATED SHIPPING DATE IS 07/05/2007 *** PRICE IS SUBJECT TO INCREASE AFTER THIS DATE*

PayPal ID: tdm8@sbcglobal.net

We're seeking for reseller partners (REQUIRES A BUY-IN). Please send me an email to tdm8@sbcglobal.net














Please note the extension pipe (off the 2.5" collector) is offered as an optional piece at $30




Modified by yellowbananaitr at 11:47 AM 7/3/2007


Modified by yellowbananaitr at 4:51 PM 7/7/2007


Modified by yellowbananaitr at 1:58 PM 7/12/2007


Modified by yellowbananaitr at 7:36 PM 7/16/2007

 

 

clean they look like the f1 spec headers

 

please let me know if i can reserve one.. i'm wanting one badd

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm biker &raquo;</TD></TR><TR><TD CLASS="quote">clean they look like the f1 spec headers</TD></TR></TABLE>

We all know the design is off Hytech. These are not like the F1Spec as the F1Spec bad batch had flange alignment issue and also F1Spec have them polished/chrome while these are brushed S/S like the Rage piece (however 50% half the price!).

Please email or call 650-757-4868 to reserve one.

 

Are these like the hytech copies that had fitment issues or does everything line up great?

 

fitment is guaranteed. look at the photos above, they line up perfectly.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redGSRguy &raquo;</TD></TR><TR><TD CLASS="quote">Are these like the hytech copies that had fitment issues or does everything line up great?</TD></TR></TABLE>

 

How long you gonna be selling these headers for? May be picking one up in a couple months.

Is it possible to get a shortened cat? kind of like the hytech exhaust system. I wanna run this on the street


Modified by DefiantGSR at 3:25 PM 7/2/2007

 

I think they'll be all gone "in a couple months"

I sell extension pipe for $30 with purchase of header. You can get it welded to the B-pipe for $20 at the muffler shop

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DefiantGSR &raquo;</TD></TR><TR><TD CLASS="quote">How long you gonna be selling these headers for? May be picking one up in a couple months.

Is it possible to get a shortened cat? kind of like the hytech exhaust system. I wanna run this on the street

</TD></TR></TABLE>

 

is the M mfactory?

 

fug it, i'm putting it on the CC. paypal sent.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LowTEC-Derbo &raquo;</TD></TR><TR><TD CLASS="quote">is the M mfactory? </TD></TR></TABLE>

This is NOT a M factory product.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DefiantGSR &raquo;</TD></TR><TR><TD CLASS="quote">fug it, i'm putting it on the CC. paypal sent. </TD></TR></TABLE>

Thank you thank you. Good choice putting it on the CC. These headers won't last long!

Payment rec'ed. Will ship ASAP. Most likely on July 5th.

 

who do we bring it to if it cracks?

 

im intrested in one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbociviccoupe &raquo;</TD></TR><TR><TD CLASS="quote">who do we bring it to if it cracks?</TD></TR></TABLE>

the warranty is through the seller, so whoever you buy it off from.

if the welds crack (due to bad weld or heat..etc.), we replace it with a new one.

if it is because your car sitting too low and go over a pothole, then causes a big dent on the header to cause the crack on welds, then it is obvisously not covered under the warranty.

fair enough?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98itRspec &raquo;</TD></TR><TR><TD CLASS="quote">im intrested in one.</TD></TR></TABLE>

thank you

PayPal ID: tdm8@sbcglobal.net

 

if i pick up in san francisco how much would it be since it's $350 shipped? can you do $350 with the extention pipe since shipping would cost about $30 if i pick up...anyways let me know thank you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ej1_408 &raquo;</TD></TR><TR><TD CLASS="quote">if i pick up in san francisco how much would it be since it's $350 shipped? can you do $350 with the extention pipe since shipping would cost about $30 if i pick up...anyways let me know thank you </TD></TR></TABLE>

pm sent

 

Is it possible to still run a cat with this if I go a custom exhaust? Do you happen to know how much long this one is than a oem jdm 4-1? What time are pick up hours? I think I will be passing through sf on sat and back there again sat night to drink in the city, where are you guys locateD?

 

It is possible but no with a stock cat unless you're willing to cut into your b-pipe and weld.

It has the same length as the hytech production; I know it is longer than the JDM 4-1, but without accurate measurement I can not tell you the exact length.

Please email me for pick up tdm8@sbcglobal.net

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redGSRguy &raquo;</TD></TR><TR><TD CLASS="quote">Is it possible to still run a cat with this if I go a custom exhaust? Do you happen to know how much long this one is than a oem jdm 4-1? What time are pick up hours? I think I will be passing through sf on sat and back there again sat night to drink in the city, where are you guys locateD?</TD></TR></TABLE>

 

Latest update 07/07/07

Confirmed shipping date is Monday, July 9th, 2007. For those of you who paid in full, we are shipping on 07/09/07. For those of who who put down a deposit, please pay on Monday 07/09 in full and we'll ship on the same day. If we don't get your balance payment on Monday, we'll contact you via email for the balance payment.

Those of you who are interested, BUY ONE NOW WHILE THE PRICE IS THIS LOW. Price will increase due to low supply & high demand.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yellowbananaitr &raquo;</TD></TR><TR><TD CLASS="quote"> Latest update 07/07/07

Confirmed shipping date is Monday, July 9th, 2007. For those of you who paid in full, we are shipping on 07/09/07. For those of who who put down a deposit, please pay on Monday 07/09 in full and we'll ship on the same day. If we don't get your balance payment on Monday, we'll contact you via email for the balance payment.

Those of you who are interested, BUY ONE NOW WHILE THE PRICE IS THIS LOW. Price will increase due to low supply & high demand. </TD></TR></TABLE>

still avail. at intro price??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMJNKY &raquo;</TD></TR><TR><TD CLASS="quote">

still avail. at intro price??</TD></TR></TABLE>


YES. Buy one (or two) while the price is low. Limited in production.

 

ALL HEADERS IN STOCK