FS: delphi 788CC low impedance injectors
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 260
Likes: 0
FS: delphi 788CC low impedance injectors
Used for approx 2000 miles....
looking for 250 shipped.
Static Flow Rate @ 43.5 PSI (300KPa) = 75.0 lb/hr / 9.5 gm/sec / 788 cc/min
Static Flow Rate @ 58.0 PSI (400KPa) = 86.6 lb/hr / 11.0 gm/sec / 909 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.75 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 2 Ohms / Low Impedance / Low-Z (Peak-hold ECM drivers or impedance converter required)
Cone Spray Angle - 22.5 degrees - single spray cone. Approximate cone angle for 90% of spray volume
Modified by 91crxturbo at 1:40 PM 7/5/2007
looking for 250 shipped.
Static Flow Rate @ 43.5 PSI (300KPa) = 75.0 lb/hr / 9.5 gm/sec / 788 cc/min
Static Flow Rate @ 58.0 PSI (400KPa) = 86.6 lb/hr / 11.0 gm/sec / 909 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.75 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 2 Ohms / Low Impedance / Low-Z (Peak-hold ECM drivers or impedance converter required)
Cone Spray Angle - 22.5 degrees - single spray cone. Approximate cone angle for 90% of spray volume
Modified by 91crxturbo at 1:40 PM 7/5/2007
Thread
Thread Starter
Forum
Replies
Last Post
vtec.dc2
Classifieds: Forced Induction
1
Apr 3, 2009 08:01 AM
