Im converting my hatch into a full Honda Challenge race car - so no need for the turbo and motor anymore. All prices are OBO - but please dont low ball me, you know how much this stuff costs. Prices do not include shipping. Local socal (im in north san diego) pickup is welcome!

If you would like more pictures or more information about anything, please feel free to PM me or message me on AIM, my screen name is liam821. Oh and my email is liam@tiora.net and my cell phone available PM me.


jdm gen3 dohc ZC longblock $2500 (i really dont want to split it apart - buyer gets it all - the whole long block. The head along cost me more then $2000!! My lose is your gain)
oil pan to valve cover - you get it all
Golden Eagle sleeved 75mm std bore
Crower Billet Rods
Wiseco 9:1 turbo pistons
ARP head studs
JG Pro-series race head with large turbo port, 1mm oversized SS valves, TI retainers
JG 1001 race cams (currently installed in head)
Crower stage 3 custom spec turbo race cams (in box, 50 miles of use, swapped out for JG cams when i bought the head)
JG sheet metal intake manifold
JG cam gears
STR fuel rail
HKS 0.7mm metal headgasket plus an extra unused spare (i bought a spare because they are uber rare and hard to fine)
fully balanced and blueprinted motor
JUN 10pound flywheel (was balanced with motor)
ACT xtr6 clutch (new disc with only 50-100 miles maybe)
obd1 dohc ZC dizzy/alternator
8-10k miles on motor, oil changed every 1000 miles, perfect compression all the way across (almost all freeway miles, drove to colorado twice, utah, and Oregon)
engine made 386whp @ 22psi with my old setup and crappy turbo. 330whp on 91 octane pump gas. This is a 550whp setup with the right turbo setup (see turbo setup for sale below).

Yes all that above, $2500. I also have some other misc engine parts ill throw in - like i have a spare oil pan, spare cams, spare headgasket, misc gaskets, stuff like that.

http://liam821.com/pix/video/liam821-dyno-1-4-5.wmv <-- video of the motor on the dyno - my old turbo/turbo manifold/intake manifold setup (amazing sound!!! )

Hydro ZC tranny (ie S20 SI tranny, no grinds shifts smooth, 40mm input spline) $350
Cusco RS D-series 1way LSD $750 (40mm input spline size - AWESOME LSD!! Cusco part number LSD 117 F - SUPER SUPER RARE - see picture below)
Raxles equal length axles for 92-00 d-series with half shaft $300 (Has the larger 40mm input spline size)

Will sell tranny/axles as whole and give you a killer deal if you want it all. A great setup - zero torque steer. Will work with any 92-00 civic with a d-series.


AFI d-series manifold (also for sale see below) and my dohc ZC monster




http://liam821.com/pix/index.p...13-04 <-- dohc ZC JG head (click the link, a bunch of pictures)

http://liam821.com/pix/index.p...19-05 <--- the intake manifold

http://liam821.com/pix/index.p...25-03 <-- dohc ZC motor build pictures

Cusco LSD



d-series turbo kit for sale - custom built by me. Will part out or sell together. All parts are almost new - maybe 100 miles of use. If you want it all - let me know asap before i start selling stuff on it - ill make you a killer deal on everything.

AFI ramhorn turbo manifold, includes dump tube: $500

Garrett gt3040r aka gt3082r .63ar, 4" ported s-cover, gt40 compressor wheel, gt30r exhaust wheel, 4 bolt exhaust, T3 flanged, ballbearing turbo. Turbo has under 100 miles of use and is in almost new condition. Bought new for $1200 - $800





Chinabay 3" exhaust for 92-95 hatchback, 4" N1 style muffler angled tip. In excellent condition no dents, sounds awesome with my setup above $100

AFI 3" downpipe and 3" flexpipe. 4bolt turbo flange. 2 bolt exhaust hookup. Was on my car with exhaust above. $250

Buy both (exhaust and downpipe) together, bolt on for 92-95 hatch, for $325.

92-95 civic intercooler piping. turbo to FMIC, FMIC to throttle body. Tial 50mm BOV flange. Painted black $50 (see picture below - not painted in picture yet)

Tial 50mm BOV (real tial, not an ebay special), silver. $140

Tial 35mm WG (real tial, not an ebay special), silver, comes with a .7bar and 1bar spring $150



Precision 053-1010 "600hp" FMIC 31 1/2" L x 8" H x 3 1/2" D, 2 3/4 inlet/outlet $300 (in excellent condition)



Semen Deka 880cc injectors $250

Cusco Comp S ITR coilovers (part # CUS-321-600-A), can be used on 92-95 civic with included LCA. Includes top hats, height adjustable, 9kg front 6kg rear (I think). $500

thanks,
liam



Modified by liam821 at 1:58 AM 6/27/2007

 

morning bump

 

Does the intercooler piping come with everything i need for my 95 hatch as far as piping goes? Couplers or no couplers?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beany &raquo;</TD></TR><TR><TD CLASS="quote">Does the intercooler piping come with everything i need for my 95 hatch as far as piping goes? Couplers or no couplers? </TD></TR></TABLE>

Yeah ill include the couplers and the connectors i used. They are the ones in the pictures above.

If your turbo is in the same general location - it should work just fine. You'll need a tial BOV - or you can buy mine. I made the piping myself for my turbo kit - so you might have to modify it a little bit to fit yours - but its a great start and cheap.

liam

 

do u have any pics of the exhaust and how much for it shipped

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quis84 &raquo;</TD></TR><TR><TD CLASS="quote">do u have any pics of the exhaust and how much for it shipped</TD></TR></TABLE>

The exhaust is still on the car, im pulling it off this weekend...but here is some pictures of it on my car.

Ill find out shipping charges asap.

 

how much do u want for a complete swap everything i need to drop it into my car besides the motor mounts?!?!?! pm me

 

i paid $80 bux to ship a 3" Thermal for a DSM 4 yrs ago from the east coast to midwest. ups ground.

interested in the ramhorn. do you have vouches?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by liam821 &raquo;</TD></TR><TR><TD CLASS="quote">

The exhaust is still on the car, im pulling it off this weekend...but here is some pictures of it on my car.

Ill find out shipping charges asap.</TD></TR></TABLE>

 

pm me!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Laserjock &raquo;</TD></TR><TR><TD CLASS="quote">i paid $80 bux to ship a 3" Thermal for a DSM 4 yrs ago from the east coast to midwest. ups ground.

interested in the ramhorn. do you have vouches?

</TD></TR></TABLE>

I'm guessing its going to be 50-80 to ship to the east coast yeah...

As for vouches i dont have a "vouch thread" but I have over 4200 posts here on honda-tech and have been a member for over 6 years. I've sold tons and tons of parts on here (do a search for posts started by me) and have never had any negative feedback.

thanks,
liam

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jfrase06 &raquo;</TD></TR><TR><TD CLASS="quote">pm me!</TD></TR></TABLE>

PM'd you

 

replied to all my PM's

 

pm'd

 

NOOOOOOOO!!!!!!

j/k buddy

Full honda challenge car huh? thats SICK! I'll be proud to say that I've had a ride in that car when I see it on TV...haha.

Buy this man's shiz!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostwerks.com &raquo;</TD></TR><TR><TD CLASS="quote">NOOOOOOOO!!!!!!

j/k buddy

Full honda challenge car huh? thats SICK! I'll be proud to say that I've had a ride in that car when I see it on TV...haha.

Buy this man's shiz!</TD></TR></TABLE>

haha thanks dude Wish me luck!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EFn JP &raquo;</TD></TR><TR><TD CLASS="quote">pm'd</TD></TR></TABLE>

replied!!

liam

 

let me know!

 

how much for the piping and the exhaust? shipped to 98445.

 

how much for the piping and the exhaust? shipped to 98445.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beany &raquo;</TD></TR><TR><TD CLASS="quote">how much for the piping and the exhaust? shipped to 98445.</TD></TR></TABLE>

PM'd

 

afternoon bump

 

My pm's dont work on here for some reason . you can get ahold of me on aim =krazycris1 or 253-441-1426. thnx.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beany &raquo;</TD></TR><TR><TD CLASS="quote">My pm's dont work on here for some reason . you can get ahold of me on aim =krazycris1 or 253-441-1426. thnx.</TD></TR></TABLE>

thanks man, ill get you those pictures today!

 

bump

 

bump

 

I call dibs on this *****'s turblow!