Does anyone know the proper belt size on an H23 ( Alternator to Crank Shaft ) to by-pass the a/c compressor, I bent the a/c pulley and its making a horrible sound, I need to by-pass it. Please Help!!!!

 

string is a wonderful thing take it wrap it around the pulleys and tie a knot then go to autozone and get a belt that length

 

the new belt might be almost as much as a used pulley. Your ac doesn't work I guess?

 

Dude if it's an H23 then just go to autozone and ask for a belt for a prelude s (F22) wothout a/c. The H23 and F22 both have five ribs, the H22 i think has six.

 

If you have an underdrive pulley for the alternator (mine is AEM), then the belt size is 385K5. Of course, I loosened the tensioner bolt all the way to make it fit. It will almost seem like it won't fit but it will. Tighten it real good afterwards.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fresco &raquo;</TD></TR><TR><TD CLASS="quote">Dude if it's an H23 then just go to autozone and ask for a belt for a Prelude S (F22) without a/c. The H23 and F22 both have five ribs, the H22 i think has six.</TD></TR></TABLE>

 

I just finished swapping belts. The proper size turned out to be a 37.5". Thanks all.