**TWIN DISC** Clutch Masters Integra/Civic **
Thread Starter
Member
Joined: Sep 2001
Posts: 1,419
Likes: 0
From: Texas
**TWIN DISC** Clutch Masters Integra/Civic **
Part # 08-913-TD6 (FX600): 94-01 Acura Integra/ 98-00 Civic SI
$800 plus shipping
Clutch was used only 400 miles.
NEW PHOTOS
Clutch Masters - Twin Disc System
Ultra High Performance Street and Race Systems
- Get 300-600% increase in holding capacity!
- Positive release for ease of High RPM Staging and Shifting
- Most have experienced better 4/10's times & averaged hundreds
of passes w/o complications or repair.
- Average weight of entire assembly is over 50% lighter then OEM.
CM Twin Disc systems are pure racing technology that also work well in high performance street applications. They are designed to hold tremendous torque ratings, while retaining a very smooth operation. By using a smaller diameter clutch assembly, these systems have a reduced rotational mass, meaning quicker and smoother shifting and much better throttle response. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competitors cast unit. Meets SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA.
Systems Include:
* Cover Assembly with attached Diaphragm
* Pressure Plate Ring
* Two Discs
* One Mid Plate
* Billet Aluminum Flywheel
* Release Bearings
* Pilot Bearing (when applicable)
* Pressure Plate Bolts
FX600 = Bonded Organic Kevlar mix for the street
Modified by rondigs at 12:48 PM 7/24/2007
$800 plus shipping
Clutch was used only 400 miles.
NEW PHOTOS
Clutch Masters - Twin Disc System
Ultra High Performance Street and Race Systems
- Get 300-600% increase in holding capacity!
- Positive release for ease of High RPM Staging and Shifting
- Most have experienced better 4/10's times & averaged hundreds
of passes w/o complications or repair.
- Average weight of entire assembly is over 50% lighter then OEM.
CM Twin Disc systems are pure racing technology that also work well in high performance street applications. They are designed to hold tremendous torque ratings, while retaining a very smooth operation. By using a smaller diameter clutch assembly, these systems have a reduced rotational mass, meaning quicker and smoother shifting and much better throttle response. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competitors cast unit. Meets SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA.
Systems Include:
* Cover Assembly with attached Diaphragm
* Pressure Plate Ring
* Two Discs
* One Mid Plate
* Billet Aluminum Flywheel
* Release Bearings
* Pilot Bearing (when applicable)
* Pressure Plate Bolts
FX600 = Bonded Organic Kevlar mix for the street
Modified by rondigs at 12:48 PM 7/24/2007
