There Was A Post About This Awhile Ago But I Cant Find It. Who Makes A Slick/drag Radial For A 13'' Vx Wheel

 

M&H makes a 205/60/13 DOT drag tire, but it's neither a slick nor a radial.

 

Where Is The Best Place To Buy These Tires From?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by josh0407 &raquo;</TD></TR><TR><TD CLASS="quote">There Was A Post About This Awhile Ago But I Cant Find It. Who Makes A Slick/drag Radial For A 13'' Vx Wheel</TD></TR></TABLE>

Mickey thompson and M&H make a 13" slick but i would advise against trying to squeeze them on a narrow VX wheel. yes they are light as hell but wayyy too narrow to run an 8 1/2 or 9" tire..... i run them in the rear as they are damn light. but i'd go with Lenso's as a cheaper alternative to run slicks.

 

Whats The Best Place To Buy The 205/60/13 M&h From

 

M&H

 

Thank You Paul. PM sent josh.

John
M&H

 

bump! bringing back the dead, looking for a slick or drag radial I can run with my OEM rims on a 93 hatch civic, 175/70/13 are original tire size

 

Is this what you are looking for b15.

Tread Width: 7.2"
Section Width: 8.8"
Diameter: 22.8"
Circumference: 71.6"
Rim Size: 6.0"


SlicksMH

 

I'm not too sure about those dimensions, but basically I'm looking for a slick that can mount to this rim, seen in the pic below

 

How wide is the wheel 13"x ?

SlicksMH

 

oem is 5.5in wide, IIRC

 

not saying it's a good idea, but I've personally seen someone run 9's on a 13" steelie with some 24.5's.

 

Thank You for the info welfarepc, then the P205/60-13 will work for the racers needs. You have a bias ply + dot.

SlicksMH