Super thanks in advance but i made a CAI myself and i want to know if the bar with clear it before i order it.If anybody could give me a measurment off a certain point in the engine,that would be awesome

 

Regardless of strut bar, the rubber tube connectors would allow you to adjust your intake tubing position accordingly, so you should not have any problem at all.

 

yeah but my engine is the y7,the throttle body faces the hood,not the passanger side wheel. So i had to come up and turn with the pipe. the radius is right were the bar would cross.

 

just fiddle around with it until it fits since you make the CIA. on another note, i have not heard of matrix in a long *** time

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mxer &raquo;</TD></TR><TR><TD CLASS="quote">yeah but my engine is the y7,the throttle body faces the hood,not the passanger side wheel. So i had to come up and turn with the pipe. the radius is right were the bar would cross.</TD></TR></TABLE>

Im well aware, i had one for years. Trust me, it will fit fine.