i was told the DA integra tb fits on a z6 intake manifold...... im not sure about that ....


Modified by sasinorm01 at 8:24 PM 6/22/2007

 

anybody

 

Yes it does. Just take a die grinder to the inside edge of the z6 mani to get the port lined up properly...preferably with the mani off the motor lol.

 

thanks... so its probably good to do for turbo setup then

 

has anyone used a da throttle body on there setup

 

Z6 uses the same bolt pattern as any B/H series so you can put anything from a JDM b16 to a B18C5 TB in there. Even F22 accords or H22/23 prelude tbS.

 

ok... where does the tps sensor mount...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sasinorm01 &raquo;</TD></TR><TR><TD CLASS="quote">ok... where does the tps sensor mount...</TD></TR></TABLE>
same location on all of the listed TB's above...on the backside of the TB

 

and does it doesnt matter if the DA tb is off an automatic

 

The only TPS you cannot use is a 88-91 CRX/Civic DX or any of the newer K series engines' TPS. Auto or manual does not make a difference