FS: Built B16a / Quaife LSD (S1) / 1991 SUPER CLEAN CRX Si (Shell) / IM Crossmember/ ETC.....
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 73
Likes: 0
From: Stockton, CA, United States
FS: Built B16a / Quaife LSD (S1) / 1991 SUPER CLEAN CRX Si (Shell) / IM Crossmember/ ETC.....
I'm going the k-series way, so out with the old and in with the NEW!! First come first serve basis.... I am willing to ship at buyers expense...Locals get priority.... I need this stuff gone ASAP to raise funds for the new project...
Im open to trades towards k-series parts or EP3 parts But I prefer cash!
*LOCATED IN NORCAL (STOCKTON CA)*
B16a (first gen) Long Block **$1700 obo**
-New oil pump
-New water pump
-ALL seals replaced
-Resurfaced
-JGE valvetrain
-Blox stage 2 cams
-Skunk2 Intake Manifold
-CTR N1 crank pulley
-New OEM Timing belt
-4 to 1 header
-Eagle Cam Gears
-Buddy club High compression Head gasket
-Hondata IM Gasket
1991 CRX Si Shell (Clean Title) **SOLD**
-Very Straight and Clean Body No rust (almost guaranty you will not find a Si as clean as this!)
-Everything operational -Sunroof / windows/ etc.. etc..
-Viper alarm
-Kyb AGX shocks (4 way adjustable) (NEW- 0 MILES)
-Skunk2 Coilovers
-Brembo Zinc plated rotors (4 cross drilled) (NEW- 0 MILES)
-New Brake pads (NEW- 0 MILES)
-New Steal braided break lines (4) (NEW- 0 MILES)
-K-sport Control Arms (NEW) (NEW- 0 MILES)
-Lower tie bar
-Upper rear tiebar
-Front sway bar
-Sony Xplode Cd player
-OEM Si Lip
S1 B16a Cable tranny **SOLD**
- QUAIFE LSD (with receipt--LIFETIME WARRANTY)
-LS 5th gear (better gas milage)
-Pro Clutch Stage 1 (NEW- 0 MILES)
-11 pound aluminum Flywheel (NEW- 0 MILES)
Innovative Mounts Front Crossmember (CRX) New Unused **SOLD**
-Bushings included (Eliminates wheel hop )
Innovative Mounts Street Motor mounts B-series into EF **SOLD**
B-Series Block guard **SOLD**
Nippon CTR pistons w/ rings (new) **Make me an offer**
B16a cosmetic head gasket (new) **Make me an offer**
More stuff to come w/ pix... Any other b-series. EF parts you need, just ask....
I am willing to sell complete swap into your EF for a good price... PM or shoot me some offers...
Let me know!!!
Modified by Mr.EF at 10:47 AM 12/4/2007
Im open to trades towards k-series parts or EP3 parts But I prefer cash!
*LOCATED IN NORCAL (STOCKTON CA)*
B16a (first gen) Long Block **$1700 obo**
-New oil pump
-New water pump
-ALL seals replaced
-Resurfaced
-JGE valvetrain
-Blox stage 2 cams
-Skunk2 Intake Manifold
-CTR N1 crank pulley
-New OEM Timing belt
-4 to 1 header
-Eagle Cam Gears
-Buddy club High compression Head gasket
-Hondata IM Gasket
1991 CRX Si Shell (Clean Title) **SOLD**
-Very Straight and Clean Body No rust (almost guaranty you will not find a Si as clean as this!)
-Everything operational -Sunroof / windows/ etc.. etc..
-Viper alarm
-Kyb AGX shocks (4 way adjustable) (NEW- 0 MILES)
-Skunk2 Coilovers
-Brembo Zinc plated rotors (4 cross drilled) (NEW- 0 MILES)
-New Brake pads (NEW- 0 MILES)
-New Steal braided break lines (4) (NEW- 0 MILES)
-K-sport Control Arms (NEW) (NEW- 0 MILES)
-Lower tie bar
-Upper rear tiebar
-Front sway bar
-Sony Xplode Cd player
-OEM Si Lip
S1 B16a Cable tranny **SOLD**
- QUAIFE LSD (with receipt--LIFETIME WARRANTY)
-LS 5th gear (better gas milage)
-Pro Clutch Stage 1 (NEW- 0 MILES)
-11 pound aluminum Flywheel (NEW- 0 MILES)
Innovative Mounts Front Crossmember (CRX) New Unused **SOLD**
-Bushings included (Eliminates wheel hop )
Innovative Mounts Street Motor mounts B-series into EF **SOLD**
B-Series Block guard **SOLD**
Nippon CTR pistons w/ rings (new) **Make me an offer**
B16a cosmetic head gasket (new) **Make me an offer**
More stuff to come w/ pix... Any other b-series. EF parts you need, just ask....
I am willing to sell complete swap into your EF for a good price... PM or shoot me some offers...
Let me know!!!
Modified by Mr.EF at 10:47 AM 12/4/2007
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 73
Likes: 0
From: Stockton, CA, United States
Re: FS: Built B16a / Quaife LSD (S1) / 1991 SUPER CLEAN CRX Si (Shell) / IM Crossmember/ ETC..... (M
Pm'ed back....
Forgot to add, Shell has front camber Kit too!!!
**1991 SI Rims included with shell!!! Not donuts!***
Forgot to add, Shell has front camber Kit too!!!
**1991 SI Rims included with shell!!! Not donuts!***
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 73
Likes: 0
From: Stockton, CA, United States
Re: FS: Built B16a / Quaife LSD (S1) / 1991 SUPER CLEAN CRX Si (Shell) / IM Crossmember/ ETC..... (M
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hartattack »</TD></TR><TR><TD CLASS="quote">Crossmember and Mounts sold to me, Thanks again</TD></TR></TABLE>
Thank you
More stuff fr sale!!!
Thank you
More stuff fr sale!!!
Member
Joined: Nov 2005
Posts: 1,431
Likes: 0
From: Modesto, CA
so a local on here selling things...dont see that often....still have tranny?
also hwo much willing to pay for a k swap????have one sitting next door at my familys business who we rent to with ef hasport mounts and header....lmk
also hwo much willing to pay for a k swap????have one sitting next door at my familys business who we rent to with ef hasport mounts and header....lmk
