I have a ls turbo in my 94 si hatch, its a drag turbo kit the motors stock.. im gonna up grade to a rld fab manifold soon. Other than that im looking for A chipped ecu and dont know where to get one on here, or what to ask for or who to ask.I wanna run 10-12 psi,i have 450 dsm injectors with the resistor box not installed yet. Any info or help would be greatly appreciated

 

you can use the ecu you have and have it socketed.

there are many sponsors in the ht sponsor marketplace that specialize in this area of our market.

 

any one better than the other?

 

no

 

http://www.phearable.net
http://www.xenocron.com

just a few to get you started

 

got that dizzy for sale yet?

 

Get a SPOON chip off of ebay and call it a day.



FYI Hondas aren't like Audi's, VW's, Nissans, Evos, etc, that use MAF sensors, and therefore can accept a generic chip. The tuning needs to be specificly for your motor, unless you don't mind possibly washing out your rings or blowing a HG because it was too rich or too lean.

Use CromePro to be cheap, s200 if you are from a Crome-deprived area, or S300/Neptune/AEM if you have a wad of cash. THen have it tuned by a pro.