Code 7=TPS After Vtec swap

Reply Subscribe

Thread Tools

Search this Thread

Jun 2, 2007 | 02:01 PM

StolenTeg

Thread Starter

Honda-Tech Member

Joined: Jan 2004

Posts: 3,107

Likes: 0

From: CT

Code 7=TPS After Vtec swap

Im running a OBD0 b16a head on my OBD2a B18b1 block, It seem like the throttle position sensor is different fron these two?

Could i use the throttle body off my b18b1, would this solve the problem?

Jun 2, 2007 | 03:05 PM

civicsi401

Joined: Mar 2007

Posts: 82

Likes: 0

Re: Code 7=TPS After Vtec swap (StolenTeg)

they are the same but u will have to adjust the tps a bit with a volt meter if that doesnt work out you may need a new tps

Jun 2, 2007 | 04:31 PM

StolenTeg

Thread Starter

Honda-Tech Member

Joined: Jan 2004

Posts: 3,107

Likes: 0

From: CT

Re: Code 7=TPS After Vtec swap (civicsi401)

Hmm i tried adjsuting but couldnt really get it on par, i have a b18b1 throttle body with afix tps.

Would a b18b1 throttle body work on a b16a head without any problem?

Jun 2, 2007 | 06:24 PM

abusedhusband

Junior Member

iTrader: (1)

Joined: Mar 2007

Posts: 501

Likes: 0

From: bordentown, nj, us

Re: Code 7=TPS After Vtec swap (StolenTeg)

yes it will work.

Jun 2, 2007 | 08:15 PM

civicsi401

Joined: Mar 2007

Posts: 82

Likes: 0

Re: Code 7=TPS After Vtec swap (StolenTeg)

it will work but u will need to throw a volt meter on to get it dead on . voltmeter is only about $20 spend the money get right its better then guess work