i searched, but couldnt find what i needed, so before i get flamed...
i am doing a d15b7 block/ d16z6 head mini-me swap in my 88 crx hf. i have a p28 ecu and an obd0 to obd1 conversion harness. i also have the z6 dist (which i was told is required for vtec to work) i cant find a write-up on how to wire all of this, since the jumper harness has a loom of maybe 10 wires that go to nothing. also, the dist plugs dont match up. all the write-ups i found involved a vtec switch and the non-vtec ecu... but this seems sketchy to me. if you know a obd1 conversion involved write-up, please direct me...

 

bump for morning

 

you will need to either repin the distributor or use a distributor adaptor