Clarion APA4320 Amplifiers (x2) + Clarion SW12X Subwoofers in Enclosure
Used amplifiers for sale, great condition - 2 Clarion APA4320 amplifiers. Specs:
APA4320 main features:
Bridgeable for 2, 3 or 4 channel operation
Max power output 640W (4 x 160W into 4 ohms)
Continuous average power output 320W (4 x 80W into 4 ohms)
Typical bridged power 2 x 230W @ 0.2% THD
Typical 2 ohm stereo power output 4 x 115W @ 0.2% THD
Bass extender 0 to+15dB @ 45Hz
Independent front and rear adjustable crossover frequencies (High Pass 550 - 5.5kHz / Low Pass 55 - 550Hz)
Adjustable line-level input (200mV to 6V)
Speaker level inputs provided to allow connection to any type of head unit
'Soft Mute' on / off circuit
Substantial gold plated isolated speaker and power connections
Asking $300.00 per shipped.


2 Clarion SW12X subwoofers in a custom enclosure
Specs:
For pure, unadulterated bass response, Clarion hits hard with the new SW series subs. Supported by a highly rigid stamped steel frame, these subs offer superior responsiveness and durability with their polypropylene cone and exclusively designed foam surround. Unlike paper cones, which sometimes add a “crisply” sound, polypropylene cones offer a natural, smooth, and well-behaved frequency response. And because of its durability, polypropylene expands the lift of your subs – even in the harsh automotive environment. Perfect for small sealed, ported, or bandpass enclosures.
Features
* One-Piece Polypropylene Cone
* Custom Stamped Steel Basket
* Foam Surround
* Heat-Resistant Voice Coil
* Flat CONEX Damper
* Rear Vented Pole Piece
* Dual Strontium Ferrite Magnets
* Custom Rubber Magnet Cover
* Chrome-Plated Wire Connectors
* Mounting Depth: 5.94"
* Mounting Hole Diameter: 11.69"

Looking for $150.00 for the woofers + box, prefer local pickup. Located in Orange County, CA.
APA4320 main features:
Bridgeable for 2, 3 or 4 channel operation
Max power output 640W (4 x 160W into 4 ohms)
Continuous average power output 320W (4 x 80W into 4 ohms)
Typical bridged power 2 x 230W @ 0.2% THD
Typical 2 ohm stereo power output 4 x 115W @ 0.2% THD
Bass extender 0 to+15dB @ 45Hz
Independent front and rear adjustable crossover frequencies (High Pass 550 - 5.5kHz / Low Pass 55 - 550Hz)
Adjustable line-level input (200mV to 6V)
Speaker level inputs provided to allow connection to any type of head unit
'Soft Mute' on / off circuit
Substantial gold plated isolated speaker and power connections
Asking $300.00 per shipped.


2 Clarion SW12X subwoofers in a custom enclosure
Specs:
For pure, unadulterated bass response, Clarion hits hard with the new SW series subs. Supported by a highly rigid stamped steel frame, these subs offer superior responsiveness and durability with their polypropylene cone and exclusively designed foam surround. Unlike paper cones, which sometimes add a “crisply” sound, polypropylene cones offer a natural, smooth, and well-behaved frequency response. And because of its durability, polypropylene expands the lift of your subs – even in the harsh automotive environment. Perfect for small sealed, ported, or bandpass enclosures.
Features
* One-Piece Polypropylene Cone
* Custom Stamped Steel Basket
* Foam Surround
* Heat-Resistant Voice Coil
* Flat CONEX Damper
* Rear Vented Pole Piece
* Dual Strontium Ferrite Magnets
* Custom Rubber Magnet Cover
* Chrome-Plated Wire Connectors
* Mounting Depth: 5.94"
* Mounting Hole Diameter: 11.69"

Looking for $150.00 for the woofers + box, prefer local pickup. Located in Orange County, CA.
Thread
Thread Starter
Forum
Replies
Last Post




