TW: 1995 Honda Civic Si (in SoCal)
*Testing Waters - 1995 Honda Civic Si*
(Good Condition)
i'm selling for many reasons: i'm just done with Honda. it has become too much of a burden for me as i'm always worried if it's safe where it's parked. it has become inconvenient for me as far as size -- i'm 6'5". it is also inconvenient because i'm limited to what road conditions i can drive through. i'm just getting too old for it. somebody younger needs to take over. i want a compact SUV now, like a Forester.
<U>Exterior</U>
- VIS Carbon Fiber Hood
- Wings West RS Front Lip
- JDM Stanley Headlamps
- JDM Stanley Corner Lamps
- JDM Stanley Sidemarkers
- JDM Honda Bumper Pole
- JDM Honda Power Folding Mirrors w/USDM mounting base
- JDM Honda Side-window Visors
- Pre-wired for Foglamps (even has switch. just Plug-N-Play)
- JDM Si-R II 1-piece Spoiler w/Stanley Extended LED
<U>Interior</U>
- USDM Front Si Seats
- JDM Honda Interior Door Panels (grey/purple)
- USDM Honda EJ1 Power Windows (clean OEM-wired)
- JDM Honda Power Folding Switch
- JDM Honda Bumper Pole Switch
- USDM Honda Optional Audio Console
- Aftermarket Bin/Cupholder
- USDM Honda Civic Hatchback Carpets
- JDM Honda Rear Interior (grey/purple)
- Black JDM Honda Cargo Box
<U>Braking</U>
- USDM IT-R 5-lug Conversion
- USDM IT-R Brake Booster w/1" Master Cylinder
<U>Wheels/Tires</U>
- 15" Rota GT-3 Front (5x114.3) on 195/50 Falcon Ziex
- 16" Rota GT-3 Rear (5x114.3) on 195/40 Falcon Ziex
- 4 ARP Extended Wheel Studs per Hub w/OEM Lock on Short Stud
<U>Suspension/Handling</U>
- Civic Neuspeed Sport Springs (progressive rate)
- Integra Tokico Gas Shocks Front (adjustable)
- Ingalls Camber Kits Front
- IT-R Koni Gas Shocks Rear (adjustable)
- Spoon Washers/Shims for Rear Camber Adjustment
- Front Z-Speed Upper Strut Tower Bar
- Rear GAB Upper Strut Tower Bar
- eBay Rear Lower Tie Bar
- IT-R Rear Lower Control Arms
<U>Powertrain</U>
- BAR'd JDM B16A (clean, and a bitch to do)
- Valve Job (3-angle)
- Re-loomed Engine Harness w/Knock Sensor (clean)
- JDM Honda Air Box and Piping
- AEM Cam Gears
- Cometic Head Gasket
- ARP Head Studs
- Billet Aluminum Cam Seal
- Straight Catback Exhaust (no resonator) w/eBay Tube Muffler
<U>Drivetrain</U>
- Road Race Shifter (extended w/weight)
- Trust Shift ****
- Low-end Exedy Clutch
- Resurfaced Flywheel
<U>Cooling</U>
- USDM IT-R Water Pump w/Tensioner Pulley
- USDM IT-R Timing Belt
- USDM Del Sol Si VTEC Theromostat
- Mishimoto 1.5" Aluminum Racing Radiator w/Billet Aluminum Fill Neck
- Spoon Racing Radiator Cap
- Heat-reduced Racing Intake Manifold Gasket
- Waterlines Bypasses Heater Core, Intake Manifold and Fast Idle Thermo Valve
<U>Audio/Security</U>
- Alpine Deck (cd/mp3 player)
- Pioneer Speakers (front & rear)
- Pre-wired for Mono Amp & Subwoofer (just Plug-N-Play)
- Viper/Clifford Remote Start Alarm w/2-way Pager/Remote
(i have some receipts of the stuff i bought for this vehicle -- newer clutch, o2 sensor, catalytic converter, IACV, distributor from distributor king, etc. i still have some other miscellaneous parts that haven't yet been installed. if you have any questions, just PM. also, since i'm "testing waters," you guys have to throw the offers.)
thanks,
_taF
(Note: cash or paypal. i'm very weary about checks. if a check is your only choice, i'll wait till you cash it.)
Modified by JDM JNKI at 7:08 PM 6/11/2007
(Good Condition)
i'm selling for many reasons: i'm just done with Honda. it has become too much of a burden for me as i'm always worried if it's safe where it's parked. it has become inconvenient for me as far as size -- i'm 6'5". it is also inconvenient because i'm limited to what road conditions i can drive through. i'm just getting too old for it. somebody younger needs to take over. i want a compact SUV now, like a Forester.
<U>Exterior</U>
- VIS Carbon Fiber Hood
- Wings West RS Front Lip
- JDM Stanley Headlamps
- JDM Stanley Corner Lamps
- JDM Stanley Sidemarkers
- JDM Honda Bumper Pole
- JDM Honda Power Folding Mirrors w/USDM mounting base
- JDM Honda Side-window Visors
- Pre-wired for Foglamps (even has switch. just Plug-N-Play)
- JDM Si-R II 1-piece Spoiler w/Stanley Extended LED
<U>Interior</U>
- USDM Front Si Seats
- JDM Honda Interior Door Panels (grey/purple)
- USDM Honda EJ1 Power Windows (clean OEM-wired)
- JDM Honda Power Folding Switch
- JDM Honda Bumper Pole Switch
- USDM Honda Optional Audio Console
- Aftermarket Bin/Cupholder
- USDM Honda Civic Hatchback Carpets
- JDM Honda Rear Interior (grey/purple)
- Black JDM Honda Cargo Box
<U>Braking</U>
- USDM IT-R 5-lug Conversion
- USDM IT-R Brake Booster w/1" Master Cylinder
<U>Wheels/Tires</U>
- 15" Rota GT-3 Front (5x114.3) on 195/50 Falcon Ziex
- 16" Rota GT-3 Rear (5x114.3) on 195/40 Falcon Ziex
- 4 ARP Extended Wheel Studs per Hub w/OEM Lock on Short Stud
<U>Suspension/Handling</U>
- Civic Neuspeed Sport Springs (progressive rate)
- Integra Tokico Gas Shocks Front (adjustable)
- Ingalls Camber Kits Front
- IT-R Koni Gas Shocks Rear (adjustable)
- Spoon Washers/Shims for Rear Camber Adjustment
- Front Z-Speed Upper Strut Tower Bar
- Rear GAB Upper Strut Tower Bar
- eBay Rear Lower Tie Bar
- IT-R Rear Lower Control Arms
<U>Powertrain</U>
- BAR'd JDM B16A (clean, and a bitch to do)
- Valve Job (3-angle)
- Re-loomed Engine Harness w/Knock Sensor (clean)
- JDM Honda Air Box and Piping
- AEM Cam Gears
- Cometic Head Gasket
- ARP Head Studs
- Billet Aluminum Cam Seal
- Straight Catback Exhaust (no resonator) w/eBay Tube Muffler
<U>Drivetrain</U>
- Road Race Shifter (extended w/weight)
- Trust Shift ****
- Low-end Exedy Clutch
- Resurfaced Flywheel
<U>Cooling</U>
- USDM IT-R Water Pump w/Tensioner Pulley
- USDM IT-R Timing Belt
- USDM Del Sol Si VTEC Theromostat
- Mishimoto 1.5" Aluminum Racing Radiator w/Billet Aluminum Fill Neck
- Spoon Racing Radiator Cap
- Heat-reduced Racing Intake Manifold Gasket
- Waterlines Bypasses Heater Core, Intake Manifold and Fast Idle Thermo Valve
<U>Audio/Security</U>
- Alpine Deck (cd/mp3 player)
- Pioneer Speakers (front & rear)
- Pre-wired for Mono Amp & Subwoofer (just Plug-N-Play)
- Viper/Clifford Remote Start Alarm w/2-way Pager/Remote
(i have some receipts of the stuff i bought for this vehicle -- newer clutch, o2 sensor, catalytic converter, IACV, distributor from distributor king, etc. i still have some other miscellaneous parts that haven't yet been installed. if you have any questions, just PM. also, since i'm "testing waters," you guys have to throw the offers.)
thanks,
_taF
(Note: cash or paypal. i'm very weary about checks. if a check is your only choice, i'll wait till you cash it.)
Modified by JDM JNKI at 7:08 PM 6/11/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g3loc1n »</TD></TR><TR><TD CLASS="quote">PMed!!!!!!!</TD></TR></TABLE>
PM'd
_taF
Modified by JDM JNKI at 12:15 PM 5/25/2007
PM'd
_taF
Modified by JDM JNKI at 12:15 PM 5/25/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by born2lose »</TD></TR><TR><TD CLASS="quote">pictures?</TD></TR></TABLE>
these are all i could get for now...

rear koni for it-r (adjustable). it-r rear lower control arms. ebay exhaust w/no resonator.

rear bumper cover on. ebay rear lower tie bar.

jdm rear interior. jdm door panels. power windows, mirrors and moonroof. road race weighted shifter. optional audio console with alpine deck (cd/mp3 player).

was just painted. bumper cover not fully bolted on. vis carbon fiber hood. wings west rs front lip not on in the pic. it-r 5-lug conversion w/it-r brake booster & 1" master cylinder. rota gt-3's. jdm headlamps, corner lamps, window visors, and folding mirros. jdm side markers aren't on in the pic. jdm bumper pole not yet installed on this bumper cover. i have another bumper cover with the foglamps and bumper pole.

after i got the cylinder head back from the machine shop. it's a bar'd jdm b16a good for smog.

aem cam gears installed after i got cylinder head back from machine shop. it-r water pump, tensioner pulley & timing belt installed few months after.
car is a different green after these pics -- highland green mettalic, but is halfway wetsanded. not sure if i'm going to repaint or leave it fully wetsanded for buyer.
_taF
Modified by JDM JNKI at 12:20 PM 5/25/2007
these are all i could get for now...

rear koni for it-r (adjustable). it-r rear lower control arms. ebay exhaust w/no resonator.

rear bumper cover on. ebay rear lower tie bar.

jdm rear interior. jdm door panels. power windows, mirrors and moonroof. road race weighted shifter. optional audio console with alpine deck (cd/mp3 player).

was just painted. bumper cover not fully bolted on. vis carbon fiber hood. wings west rs front lip not on in the pic. it-r 5-lug conversion w/it-r brake booster & 1" master cylinder. rota gt-3's. jdm headlamps, corner lamps, window visors, and folding mirros. jdm side markers aren't on in the pic. jdm bumper pole not yet installed on this bumper cover. i have another bumper cover with the foglamps and bumper pole.

after i got the cylinder head back from the machine shop. it's a bar'd jdm b16a good for smog.

aem cam gears installed after i got cylinder head back from machine shop. it-r water pump, tensioner pulley & timing belt installed few months after.
car is a different green after these pics -- highland green mettalic, but is halfway wetsanded. not sure if i'm going to repaint or leave it fully wetsanded for buyer.
_taF
Modified by JDM JNKI at 12:20 PM 5/25/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by THE ONE »</TD></TR><TR><TD CLASS="quote">What kind of offers have you received? PM me. AC still works too?</TD></TR></TABLE>
PM'd
_taF
PM'd
_taF
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beaneg6 »</TD></TR><TR><TD CLASS="quote">whats your highest offer? its clean
</TD></TR></TABLE>
thanks. PM'd
_taF
</TD></TR></TABLE>thanks. PM'd
_taF
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92 BLUE EG6 »</TD></TR><TR><TD CLASS="quote">7k
</TD></TR></TABLE>
thanks. based off the offers from another online ad where i have it listed, i'm convinced to start from $7k obo.
_taF
</TD></TR></TABLE>thanks. based off the offers from another online ad where i have it listed, i'm convinced to start from $7k obo.
_taF
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nostreble »</TD></TR><TR><TD CLASS="quote">that **** looks clean!!!! free bump </TD></TR></TABLE>
thanks
_taF
thanks
_taF
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by y0whuddupb »</TD></TR><TR><TD CLASS="quote">bump cuz i agree with all your reasons & the car is mintyyy!!
</TD></TR></TABLE>
thanks
_taF
</TD></TR></TABLE>thanks
_taF
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eJone powereD »</TD></TR><TR><TD CLASS="quote">damnit youre selling it?! wanna trade for my coupe? hahah
</TD></TR></TABLE>
it's time to let this green gem go and have another vehicle painted green. i love hatchbacks so much, but i need bigger.
sorry, but i want a wagon/compact suv -- possibly an impreza wagon, but more likely a forester.
_taF
Modified by JDM JNKI at 11:16 AM 5/29/2007
</TD></TR></TABLE>it's time to let this green gem go and have another vehicle painted green. i love hatchbacks so much, but i need bigger.

sorry, but i want a wagon/compact suv -- possibly an impreza wagon, but more likely a forester.
_taF
Modified by JDM JNKI at 11:16 AM 5/29/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92 BLUE EG6 »</TD></TR><TR><TD CLASS="quote">Location?</TD></TR></TABLE>
PM'd
_taF
PM'd
_taF



