I have a 1995 honda prelude
I removed my Air box today and there was a tube coming out of it into some type of solenoid and a tube coming from that to the after market intake. The solenoid or sensor was conected with some wires, i unplugged it and rmoved everything that connected to the air box. Removing this sensor what effect will it have on my car?

 

no everyone that puts an intake in removes that

 

Mass Air flow sensor for one... CEL will pop up.

 

even if i have a 1995 honda prelude, it obd 1, will it still have a CEL? is that part really needed?

 

obd1 do not have a mass air flow sensor

 

Wait.. if it was just the intake housing, then no. I'm sorry for the confusion.

 

it was a senor or solenoid that was conected to the bottom of the air box through a tube and had a another tube connecting to the intake

 

your car will run the same without it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sdr85 &raquo;</TD></TR><TR><TD CLASS="quote">Mass Air flow sensor for one... CEL will pop up.</TD></TR></TABLE>

Hondas don't use MAFs tard, we have MAP sensors.

 

would this be the same on a 94 vtec? wheni removed my airbox i didnt see any wires or anything connected to my airbox.

 

if you didnt have it then dont worry about it, your fine

 

i have a 93 Si... and i didnt have to remove anything when i put my intake in

 

are you talking about the butterflys that open up the resonator? if so yeah you dont need them But I though only 5th gen had those.