I tried in the hybrid forum, but got no help, so I figured you guys would know.

Ok, I have a 94 del sol vtec with a B16a3 stock in the car. I am planning on doing a mild turbo setup and wanted the extra displacement while I am at it. So I was to throw a "semi-built" GSR bottom end in, with just cp pistons and eagle rods, my question is, what am I going to have to change?

I dunno, like stupid questions have popped in my head, is the oil setup the same, is the coolant lines the same, do the intermediate shafts 3 mounting bolts to the block are the same for a b16 and a gsr, or am I going to have to get a gsr intermediate shaft.

I dunno, I searched gsr, but didn't find anything to help me. I am probly putting to much thought into it, but any advice/help would be much appreciated.

 

just slap it on. im running a b16 head on my gsr too. lil less compression. like -.2

 

Will work perfect. I will have the same setup.

 

so EVERYTHING is the same?

 

everything is the same. use gsr head studs

 

It should bolt right up with no problems. Def use GSR head bolts or replace with studs.

 

so arp head studs for a gsr is the only addon, thanks.