FS: Crower 404 Cams B18B/A
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Re: (1.8L_allmotormilitia)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1.8L_allmotormilitia »</TD></TR><TR><TD CLASS="quote">404 are sick! bump! so much power for a non-vtec motor! just wondering for future reference how did it idle? would it be obvious if a gay *** cop knew you had cams or something?</TD></TR></TABLE>
I really dont think so... I got pulled over for my exhuast. It loped at idle a little but sometimes it idled like stock. Its all in the tuning and what mods you have done. If you open up the exhaust and intake it will not lope as much.
I really dont think so... I got pulled over for my exhuast. It loped at idle a little but sometimes it idled like stock. Its all in the tuning and what mods you have done. If you open up the exhaust and intake it will not lope as much.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Re: (jdls93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdls93 »</TD></TR><TR><TD CLASS="quote">how much for just the cams shipped to 60914?</TD></TR></TABLE>
Shipping is $20 added
I will do it for $280 shipped
Modified by volcom40street2 at 8:45 AM 5/18/2007
Shipping is $20 added
I will do it for $280 shipped
Modified by volcom40street2 at 8:45 AM 5/18/2007
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Re: FS: Crower 404 Cams B18B/A (volcom40street2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by volcom40street2 »</TD></TR><TR><TD CLASS="quote">Selling them to go back to stock after modified emissions ticket 
I will sell them with the Whitfield tuned ecu. The ecu is all set up for these cams. I will also throw in the obd2a to obd1 ecu conversion harness. If you do not need the conversion harness let me know.
I'm very **** about my parts, so in the pictures you will see these are prime and have been oiled and wrapped up to be stored in my room(see pics).
They have about 5000 miles on them and worked really good in my car(see dyno sheet).
Cams: $280
Ecu(OBD1): $100
- has step limiter launch set at 4000 rpm
- check engine shift light set at 7800 rpm
- Chrome Pro already installed
OBD2a to OBD1 conversion harness: $70
Total = $450
I will let it go for $380 OBO will ship at buyers expense. Or $280 cams only shipped.
Modified by volcom40street2 at 8:33 AM 5/16/2007
Modified by volcom40street2 at 8:47 AM 5/18/2007</TD></TR></TABLE>
I will sell them with the Whitfield tuned ecu. The ecu is all set up for these cams. I will also throw in the obd2a to obd1 ecu conversion harness. If you do not need the conversion harness let me know.
I'm very **** about my parts, so in the pictures you will see these are prime and have been oiled and wrapped up to be stored in my room(see pics).
They have about 5000 miles on them and worked really good in my car(see dyno sheet).
Cams: $280
Ecu(OBD1): $100
- has step limiter launch set at 4000 rpm
- check engine shift light set at 7800 rpm
- Chrome Pro already installed
OBD2a to OBD1 conversion harness: $70
Total = $450
I will let it go for $380 OBO will ship at buyers expense. Or $280 cams only shipped.
Modified by volcom40street2 at 8:33 AM 5/16/2007
Modified by volcom40street2 at 8:47 AM 5/18/2007</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Re: FS: Crower 404 Cams B18B/A (volcom40street2)
***********NOW ON EBAY: Starting out at $280 dollars**************
http://cgi.ebay.com/ebaymotors...&rd=1
http://cgi.ebay.com/ebaymotors...&rd=1
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 999
Likes: 1
Re: FS: Crower 404 Cams B18B/A (volcom40street2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by volcom40street2 »</TD></TR><TR><TD CLASS="quote">6 days left</TD></TR></TABLE>