Titusville, FL LS PR4 head with Crower VS & Ret, SS valves, valve seals, fresh $495
I have a PR4 head that I took to a competent Stradley's/NAPA machine shop and had them:
Pressure test, clean, inspect, perform valve job and assemble with :
Crower dual springs and Tit. Ret. package (only 3k miles)
New SI Industries stainless steel valves
New valve seals.
This head is fresh from the shop and ready to install.
Sucks that I lost my job and now have to take a huge hit. Basically, the head is free, and I am only asking for a portion of my investment back, rent is due.
Machine shop bill $226 includes the new valve seals and valve job
Crower VS & Tit. Ret $225
SI Ind. SS valves $150
My investment not including the head, $601.
So, you get a fresh build Crower head for $495 plus actual shipping charges.




I also have Crower 404's available for $225 or $200 if purchased with the head and a new MLS headgasket as well for $25. Also a moon cut valve cover for $45.
Notice: If a miracle happens and I win the lottery or find a job that will advance my first paycheck or I sell a kidney, then the head will not be sold. The $495 price plus shipping is FIRM, I am already losing about $200. Contact me on this thread or thru email: sam92teg@yahoo.com
Modified by Sam92Teg at 5:15 PM 5/7/2007
Pressure test, clean, inspect, perform valve job and assemble with :
Crower dual springs and Tit. Ret. package (only 3k miles)
New SI Industries stainless steel valves
New valve seals.
This head is fresh from the shop and ready to install.
Sucks that I lost my job and now have to take a huge hit. Basically, the head is free, and I am only asking for a portion of my investment back, rent is due.
Machine shop bill $226 includes the new valve seals and valve job
Crower VS & Tit. Ret $225
SI Ind. SS valves $150
My investment not including the head, $601.
So, you get a fresh build Crower head for $495 plus actual shipping charges.




I also have Crower 404's available for $225 or $200 if purchased with the head and a new MLS headgasket as well for $25. Also a moon cut valve cover for $45.
Notice: If a miracle happens and I win the lottery or find a job that will advance my first paycheck or I sell a kidney, then the head will not be sold. The $495 price plus shipping is FIRM, I am already losing about $200. Contact me on this thread or thru email: sam92teg@yahoo.com
Modified by Sam92Teg at 5:15 PM 5/7/2007
wow.
If you still have this in a week or so I will take it. I'm just waiting for my loan application to clear to rebuild my DA.
for now BUMP for an awsome setup.
If you still have this in a week or so I will take it. I'm just waiting for my loan application to clear to rebuild my DA.
for now BUMP for an awsome setup.
Hey thanks, this happens to me all the time. I save up parts, then have to sell for a loss, kills me every time. I almost had everything I needed for my 404 powered LS beast.
Yes, the cams are still available, alot of people wanting them and showing interest, but I guess money is tight. Everything else has been shipped and received by the buyers. If the cams don't sell soon, and I have some paychecks rolling in, I will probably keep them for my car.
Pics of the cams are here: http://www.g2ic.com/forums/showthread.php?t=165680
Pics of the cams are here: http://www.g2ic.com/forums/showthread.php?t=165680
Trending Topics
Hey gutted-dx, send me an email at sam92teg@yahoo.com and we can correspond that way. This email address is actually my paypal address as well.
Thread
Thread Starter
Forum
Replies
Last Post
Halo
Acura Integra
6
Sep 9, 2001 04:25 PM





