I've got a 91 Civic SI race car which we just dropped in a b16b in it right now. The original wiring was botched and botched time after time (I am not doing any of the work on the car, just relaying info from the builder, which has never worked on an EF before but works on their own race integras, RSX, and TSX's). Everything on what was there electrically kept comming loose and was spliced many times over. For 2 years we wern't able to fully compete because of massive electrical problems which were almost next to impossible to trace. I asked that we put new or "fresh" wiring into the car. Now this is where I am lost, and the parts which I am asked to look for I dont get it.

Ordered some parts from Rywire, which by the way is awsome. and from what I understand I have
.
Note these arn't my pictures, rather pulled from various websites. Now my engine builder is telling me I need a set of wires which connect from the ECU to the firewall, and a set of wires which connect from the ECU to the kick panel on the drivers side door.

I am trying to understand what i need through http://www.hondapartsunlimited.com

but its tough to make things out with that and I really dont get what I am looking for. Normally the engine builder would have everything sorted but they need to get their cars ready for their next race and asked me to source out the parts I need so we can both make our races next week in time.

Can anyone help out a electrical newbie here and tell me what I need (photos would be best). We have a p30 ecu if that helps anyone out.

Thanks in advance.