just put my kit on and took few pics before the test drive. still have a few things to fix like the zip ties holding the oil line

 

looks nice...

what engine management are you using?

where did you purchase the kit?

any other mods to support the kit? rear end, clutch etc.?

 

take that mesh **** off the turbo inlet ........

 

little faster??

 

low boost, fmu right now waiting on aem. no other mods but a 3mm headgasket. the clutch needs to be changed out but still made a 116mph pass at the track. I dont really want to say whos kit it is right now as they still need to work some things out with it. as far as the "mesh" thats just a cut up filter its what i run day to day with metal screen under it and just run the screen at the track and such.

 

does that need a oil filter relocation kit?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eflove &raquo;</TD></TR><TR><TD CLASS="quote">low boost, fmu right now waiting on aem. no other mods but a 3mm headgasket. the clutch needs to be changed out but still made a 116mph pass at the track. I dont really want to say whos kit it is right now as they still need to work some things out with it. as far as the "mesh" thats just a cut up filter its what i run day to day with metal screen under it and just run the screen at the track and such.</TD></TR></TABLE>

they restrict flow, like alot , run a foam filter instead of those

yeah, get rid of the FMU, it's so 95.

 

Very nice.

What turbo are you using, And what exhaust is that?

Sweet setup.

That kid looks pretty solid to me !!!


Modified by TomTomTuning at 4:39 PM 4/22/2007

 

yes i have had that problem in the past with cutting up a reg filter. this is a incabin airfilter flows rather good. i have felt no reduction in power,lag ect. Yeah the fmu is so 95 ha. like i said just waiting on the aem. no need for oil filter relocation but i did have to use a shorter oil filter (93 rx7). turbo is a gt3076 exh is custom 3in AL made by the same company.

 

Why do you even bother with that mesh on the turbo, nothing is getting up to it.

 

well when i was putting the kit on looking around where the turbo placement is i found quite a few small rocks.

 

is that a kit or custom? looks like love fab to me.

 

its not lovefab. it is a kit

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eflove &raquo;</TD></TR><TR><TD CLASS="quote">its not lovefab. it is a kit</TD></TR></TABLE>

what kit, or is it custom?

 

pm'd

 

did you paint the center of the turbo black? or is it coated? just curious...never seen that done before. . .

 

no paint or anything might of just been the picture

 

PM me what kind of kit that is if you don't mind, it looks nice!

How about the plumbing for the front mount, did you have to relocate the air pump?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eflove &raquo;</TD></TR><TR><TD CLASS="quote">just put my kit on and took few pics before the test drive. still have a few things to fix like the zip ties holding the oil line

</TD></TR></TABLE>

what exhaust is that?

edit: did AFI make the kit? looks good

 

is that a completely custom muffler or is it an actual company?

 

the muffler is a burns

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eflove &raquo;</TD></TR><TR><TD CLASS="quote">I dont really want to say whos kit it is right now as they still need to work some things out with it</TD></TR></TABLE>

 

That's dope, but more info. would have been nice. Bunch of pictures don't help people out who are looking to boost in the future.

 

what more would you like to know?

 

Clean setup.