highend or rage header
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 3,138
Likes: 0
From: Suck it Trebek
highend or rage header
ok yeah yeah obviously i saw the 909 headershootout and i know they perform similarly but anyone with any experience with these 2 headers wanna say anything good or bad about them? ive seen people talkin about the rage but no one seems to have the highend
rage http://www.kteller.biz/product...tails
highend
https://honda-tech.com/zerothread?id=1728941
motors in my sig ~180hp non vtec b20
heres the header i currently have its a 4-2-1 similar in design to the rage but its a POS rusted mild steel header thats cracked on me for the last time
rage http://www.kteller.biz/product...tails
highend
https://honda-tech.com/zerothread?id=1728941
motors in my sig ~180hp non vtec b20
heres the header i currently have its a 4-2-1 similar in design to the rage but its a POS rusted mild steel header thats cracked on me for the last time
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 3,138
Likes: 0
From: Suck it Trebek
Re: highend or rage header (alterdcreations)
get what my header coated? its already cracked 3 times, twice on the collector and one of the primaries now. its also been on the car for 3 years so its a bit rusty. that photo was taken when i first got it.
anyone else?
anyone with a rage want to comment on ground clearance?
anyone else?
anyone with a rage want to comment on ground clearance?
Member
Joined: Nov 2004
Posts: 4,353
Likes: 1
From: Pasadena, CA
Re: highend or rage header (JCushing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JCushing »</TD></TR><TR><TD CLASS="quote">get what my header coated? its already cracked 3 times, twice on the collector and one of the primaries now. its also been on the car for 3 years so its a bit rusty. that photo was taken when i first got it.
anyone else?
anyone with a rage want to comment on ground clearance?</TD></TR></TABLE>
what chassis?
when i had my ef on h&r race springs w/ the rage header i only had about 3 -4 fingers ground clearance....pretty much horrible for street driving....theres been times where i scrape it just going over a bump in the road...the same motor/header is going into my 95 civ coupe...the motor sits a little higher in this chassis so hopefully it will have better clearance....have been super busy at work so i doubt ill be able to put the motor in till sometime next week...will take pics then if u want
anyone else?
anyone with a rage want to comment on ground clearance?</TD></TR></TABLE>
what chassis?
when i had my ef on h&r race springs w/ the rage header i only had about 3 -4 fingers ground clearance....pretty much horrible for street driving....theres been times where i scrape it just going over a bump in the road...the same motor/header is going into my 95 civ coupe...the motor sits a little higher in this chassis so hopefully it will have better clearance....have been super busy at work so i doubt ill be able to put the motor in till sometime next week...will take pics then if u want
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 3,138
Likes: 0
From: Suck it Trebek
Re: highend or rage header (Suck my DX)
its in a DC, i know its hard to tell from that picture of what i have now but the header i currently have is almost a dead ringer for the rage. i think the 4-2 merge has the collectors facing a different way but its basically the same and my clearance sux... so that pretty much sells it for the highend, i dont really have time to wait for an AN-R or RMF so i got to buy something off the shelf...
