Obviously the front bumpers between the 90-91 and 92-93 Integra's are different. Most noticably from the front. But is that all that is different?

I really like the lip choices on the 92-93's, but hate how they don't have the front holes on the bumper.

Would much modification need to be done to get a 92-93 lip to fit a 90-91?

TIA

 

www. passwordjdm.com they line right up

 

I have a 1991 integra with the 92-93 front end
I had to buy the bumper,bumper turn signal,everything that hold the front bumper up.

 

But with an integra with a 90-91 front end. What modification is nessecary for a lip from a 92-93 integra to fit a 90-91 front end, if any at all.

 

ive done this with my car,when you put the lip on its about 1 inch to long on each side,just center the lip up to your bumper drill it on and cut the extra plastic off on each side.do it clean and it will look good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jojodb1 &raquo;</TD></TR><TR><TD CLASS="quote">ive done this with my car,when you put the lip on its about 1 inch to long on each side,just center the lip up to your bumper drill it on and cut the extra plastic off on each side.do it clean and it will look good. </TD></TR></TABLE>

So it will fit, just minor modifications to the ends?